Exam Home Website
中文 English
0
/100
FAIL
Correct: 0/100 Total Questions: 100 Time Spent: 60min0sec
Passing: 80
Retake History
Answer Review
✗
Question 1. The correct shipboard attitude toward PSC is?
Your Answer: (Not answered)
Correct Answer: A (comply daily, cooperate, fix findings, keep true records)
💡 A real daily SMS stays calm at inspection; last-minute faking fails.
✗
Question 2. The nature of EU MRV / IMO DCS is?
Your Answer: (Not answered)
Correct Answer: D (mandatory monitoring, reporting and verification of fuel/CO2 data)
💡 Both require annual monitoring, reporting and verification of fuel and CO2 data for transparency and regulation.
✗
Question 3. In fog, how are the lookout and the engines handled?
Your Answer: (Not answered)
Correct Answer: C (post extra lookouts, work the radar, show the lights, sound the fog signal, ease off speed and get the engines ready)
💡 In restricted visibility the ship must strengthen seeing, hearing and being seen at the same time: extra lookouts including the bow and a listening watch, radar worked properly with plotting to identify neighbours and objects, navigation lights and fog signal as required, and speed reduced so that the ship can be stopped within what the visibility and the state of affairs then allow. The engines stand ready for immediate manoeuvring, the steering gear and emergency steering arrangements stay available, communications remain manned, and anchoring or waiting in safe water is used where sensible. Switching gear off to cut clutter, reading traffic off the displays alone, or lengthening the radar scale while keeping speed all hand the risk to the instruments.
✗
Question 4. The surveyor asks to see SMS records during survey; the ship should?
Your Answer: (Not answered)
Correct Answer: D (provide genuine records and never fabricate or back-fill them)
💡 Records must be genuine; back-filling or falsifying escalates to a major non-conformity and damages credibility.
✗
Question 5. The focus of controlling externally sourced documents is?
Your Answer: (Not answered)
Correct Answer: B (confirm source and edition, assess applicability and add to the list)
💡 Verify source and edition, judge applicability, list and brief before using external regulations or maker data.
✗
Question 6. Which about critical shipboard operations is WRONG?
Your Answer: (Not answered)
Correct Answer: A (critical operations may be set ad hoc by the watch without documentation)
💡 Critical operations must be documented and strictly followed, not improvised by the watch.
✗
Question 7. If the Company DOC is suspended but the ship sails with an SMC, PSC should?
Your Answer: (Not answered)
Correct Answer: A (detain the ship, since the SMC's underpinning DOC is void)
💡 The SMC depends on a valid DOC; a void DOC voids the SMC.
✗
Question 8. Who should sign entries in the Oil Record Book?
Your Answer: (Not answered)
Correct Answer: B (the officer in charge of the operation, countersigned by the master)
💡 Each operation is recorded and signed by the officer in charge and each page is signed by the master.
✗
Question 9. The typical validity of an SMC is?
Your Answer: (Not answered)
Correct Answer: A (five years, with at least one intermediate audit)
💡 An SMC is valid five years subject to an intermediate audit; lapses affect trading.
✗
Question 10. What should structural maintenance records be?
Your Answer: (Not answered)
Correct Answer: C (complete and continuous, forming a traceable history for survey and decisions)
💡 Continuous records show corrosion and repair trends and support survey, budgeting and risk assessment.
✗
Question 11. Complex equipment (IGS, purifier) should be provided with?
Your Answer: (Not answered)
Correct Answer: A (concise operating instructions and emergency stop steps)
💡 Instructions cut misuse; emergency steps protect safety.
✗
Question 12. In the planned maintenance system, which equipment is picked out for special attention?
Your Answer: (Not answered)
Correct Answer: C (equipment whose sudden failure would put safety, persons on board or the environment at risk)
💡 The weight sits on the critical equipment list. The test is neither price nor mere presence in the inventory but whether sudden failure would endanger the ship, the people on board or the environment, which brings in the steering gear and its hydraulics, fire pumps and fixed extinguishing systems, lifeboats and their release gear, the main engine and the auxiliaries serving it, and the navigation and communication gear. Company and ship keep the list together from the actual layout, the maker's instructions and the record of past failures, and each entry states who checks it, how often and what counts as satisfactory, the sheet being signed and filed when done. The surveyor will look for those records, but nobody else writes the list for the ship. Spreading the effort evenly over a few hundred items is how the handful that truly must not fail end up with no one watching them.
✗
Question 13. Which measure reduces carbon intensity most directly?
Your Answer: (Not answered)
Correct Answer: A (optimising speed and route to cut unnecessary resistance and waiting)
💡 Speed and routing optimisation cuts fuel directly, with hull and propeller cleaning and trim optimisation.
✗
Question 14. Why do sounding and isolation come before the water?
Your Answer: (Not answered)
Correct Answer: C (find what is burning and where, cut the power, the fuel and the ventilation, then settle the medium and the quantity)
💡 The order at a fire is: find it, raise the alarm, isolate, then fight it to suit. Which compartment, what is burning, whether it has reached the next compartment over, whether ventilation, power and fuel have been cut. Much water before that is settled spreads an oil fire as it flows, endangers anyone working on an electrical fire, and leaves weight low in the ship with a free surface and a loss of stability, since cooling water that cannot be pumped out heels the vessel. Sounding itself needs an arrangement: two or more together, hose ready, the bulkhead and hatch cover felt for heat, the door prepared before it is opened. Abandoning and broadcasting both come after this step, not before it.
✗
Question 15. Responsibilities for supporting surveys should be defined down to?
Your Answer: (Not answered)
Correct Answer: A (specific positions and persons including preparation, escort and follow-up)
💡 Assign duties by post and person for preparation, escort, findings and follow-up to avoid confusion on the day.
✗
Question 16. How are key operations identified?
Your Answer: (Not answered)
Correct Answer: B (by the consequence if it fails such as injury, pollution or damage)
💡 Judge by consequences: if failure could injure, pollute or cause major loss, manage it by procedure.
✗
Question 17. Which ships are selected before the officer steps aboard?
Your Answer: (Not answered)
Correct Answer: A (ships are ranked by an accumulated risk profile, not by her age or whether she is in ballast)
💡 Selection works on the accumulated profile: the deficiency and detention history of the ship, of her company and of her flag, the safety and labour compliance scores, how long it is since she was last looked at, the ports and trades she has been to - all added up and ranked. Being in ballast, being young, or standing on some list are not reasons by themselves: a new ship can have equipment never properly set to work, and a ship of a well-regarded company is still found out sometimes. The point of the ranking is to spend the few inspectors available where the risk actually sits, which is why a poor profile brings shorter intervals and closer attention, and a good one longer.
✗
Question 18. The correct follow-up when equipment defects surface during a drill is?
Your Answer: (Not answered)
Correct Answer: D (record, repair request, add to PMS and verify serviceability)
💡 Drill findings must be logged, repaired, tracked in PMS and verified serviceable.
✗
Question 19. What is the key to fuel changeover?
Your Answer: (Not answered)
Correct Answer: D (controlling the rate of temperature change to avoid thermal shock and wax)
💡 Control heating and cooling rates during changeover to avoid thermal shock, filter clogging and pump sticking.
✗
Question 20. On receiving a distress signal from another vessel/aircraft, the ship should?
Your Answer: (Not answered)
Correct Answer: B (proceed to assist unless own safety precludes, and report to RCC)
💡 Assisting distressed craft is a duty, unless own safety is at risk.
✗
Question 21. A typical sign of losing situational awareness (SA) is?
Your Answer: (Not answered)
Correct Answer: C (unaware of unfolding risk, missing the intervention window)
💡 Losing SA means missing change and its meaning, often from distraction, automation reliance or fatigue.
✗
Question 22. How is the team's shared situational awareness raised?
Your Answer: (Not answered)
Correct Answer: D (report position, situation and intention at set intervals, cross-check, keep the picture open to the team)
💡 Awareness is not each man making his own estimate; it is one picture shared by the group: in handover and on watch, position, course and speed, traffic, weather and sea, the mode in force and the next intention are spoken out, and the officer, the helmsman, the pilot and the lookout are asked to repeat or question it, with any divergence corrected there and then. Saying "I am not sure" is safer than pretending to understand. Telling the helmsman and the engine room the plan in advance removes misreading. Keeping to one's own post, talking as little as possible and hoarding the picture with the master put the whole judgement on one man - and it is a recurring line in collisions and groundings that somebody saw the anomaly and never said it into the shared picture.
✗
Question 23. If abnormal deformation is found during hull inspection, what applies?
Your Answer: (Not answered)
Correct Answer: A (record position and size, photograph and report company and class for assessment)
💡 Deformation may mean buckling or overload; record, report and have it assessed, never handle it yourself or delay.
✗
Question 24. What is the problem with an over-long information chain on board?
Your Answer: (Not answered)
Correct Answer: C (distortion and delay with unclear responsibility)
💡 More layers mean distortion and delay; route critical safety information directly with a clear owner and feedback.
✗
Question 25. Who first knows that something is wrong with the machinery?
Your Answer: (Not answered)
Correct Answer: B (the watchkeeper and those walking the rounds - whether they report and when decides whether the intervention comes before or after the failure)
💡 The first signs of a fault are usually with the watch, in the eye, ear and hand: temperature, vibration, a smell, a weep, a change of note. Whether they report and how quickly settles whether intervention falls before the failure or after it. What the system therefore has to supply is not feeling but a standard to judge by - the round sheet, the parameter limits - a report route that costs little to use, and an answer that shows the report went somewhere; after twice of reporting into silence nobody reports. An alarm covers only the quantities it was designed to see, and a sensor drifting or a part wasting below its threshold makes no sound. The monthly return shows averages, which is exactly the data that smooths an anomaly away.
✗
Question 26. The inspection focus for the emergency fire pump and fire main is?
Your Answer: (Not answered)
Correct Answer: B (reliable starting, adequate pressure, sound piping and hydrants)
💡 Start it to confirm pressure, check pipes, valves and hydrants, verify isolation valves and record the test.
✗
Question 27. What is the focus of maintaining watertightness of decks and hatch covers?
Your Answer: (Not answered)
Correct Answer: B (seals, cleats and drainage in good working order)
💡 Watertightness depends on seal elasticity, cleat loading and clear drains; inspect, test and renew aged parts.
✗
Question 28. If an oil sheen is found and the ship is a suspect source, the first step is?
Your Answer: (Not answered)
Correct Answer: D (verify line-ups, valves and tank status and report to the master at once)
💡 Check for inadvertent discharge or leakage, report to the master and the coastal State, and preserve evidence.
✗
Question 29. Why are makeshift electrical connections forbidden on board?
Your Answer: (Not answered)
Correct Answer: B (overload heating and short circuits cause fire and breach survey requirements)
💡 Makeshift wiring lacks protection and capacity calculation, easily overheating and shorting, a major fire cause.
✗
Question 30. When reality forces deviation from a written procedure, one should?
Your Answer: (Not answered)
Correct Answer: C (deviate temporarily if safe, record and review afterwards)
💡 Controlled deviation must be recorded and reviewed—flexible yet disciplined.
✗
Question 31. The first choice for external emergency communication is?
Your Answer: (Not answered)
Correct Answer: D (use VHF, MF/HF or satellite distress calling as appropriate to the area)
💡 Use the appropriate distress path for the area and equipment—DSC VHF, MF/HF or satellite—and keep watch.
✗
Question 32. The danger of back-dating or writing records late is?
Your Answer: (Not answered)
Correct Answer: C (destroys authenticity, easily detected by inspection and inquiry, inviting severe penalty)
💡 Back-dating shows handwriting, ink and timeline contradictions, escalating a clerical issue into one of integrity.
✗
Question 33. Relieving, the master finds good operation but key certificates expiring soon; he should?
Your Answer: (Not answered)
Correct Answer: D (raise the alert, report to the company and plan renewal or interim cover)
💡 Expiry is a compliance risk: alert early, arrange surveys or relief crew and ensure no gap in validity.
✗
Question 34. Which is outside document control?
Your Answer: (Not answered)
Correct Answer: B (crew members' private letters)
💡 Document control covers system documents and records, not private correspondence.
✗
Question 35. Which level does each of them govern, procedure and instruction?
Your Answer: (Not answered)
Correct Answer: C (the procedure says who does it, when it is done and how departments meet; the instruction says how this step is performed)
💡 Documentation is usually layered: the manual states the policy and the commitments; procedures answer who does it, when, how departments interface and where the record is kept; instructions and notices answer how the particular step is performed, how far a valve is opened, what goes in which box; forms are the evidence that it was done. The layers differ not in style but in responsibility - a procedure changes after review at company level, while an instruction may only need the order of one step adjusted on board for the equipment actually fitted, and even that is controlled and issued by version to the post that uses it. To call an instruction an abridged procedure loses that control relationship.
✗
Question 36. When using low sulphur fuel in an emission control area, what should be done?
Your Answer: (Not answered)
Correct Answer: A (change over in good time and keep bunker notes and changeover records)
💡 Changeover takes time and volume planning; do it early and keep bunker notes, logs and samples for inspection.
✗
Question 37. Audit concern when the company fails to supply adequate spares is?
Your Answer: (Not answered)
Correct Answer: A (resource non-conformity showing inadequate support under Chapter 6)
💡 Missing spares breach the resource duty and risk breakdown or detention; fix procurement, not push it to the ship.
✗
Question 38. The role of maintenance records in the SMS and PSC?
Your Answer: (Not answered)
Correct Answer: C (prove good order and timely care, compliance evidence)
💡 Records prove airworthiness and timely care; PSC checks critical-equipment histories.
✗
Question 39. To prove its SMS complies with ISM, a Company must obtain?
Your Answer: (Not answered)
Correct Answer: C (a Document of Compliance (DOC); each managed ship needs an SMC)
💡 The Company holds a DOC; each ship it manages holds an SMC — the pair evidences compliance.
✗
Question 40. Asked about SMS documents kept in the master's cabin, you should?
Your Answer: (Not answered)
Correct Answer: B (fetch them promptly for inspection, never rely on memory or delay)
💡 Produce documents at once; relying on memory or delaying suggests poor document control and raises findings.
✗
Question 41. The three most common causes of shipboard fire are?
Your Answer: (Not answered)
Correct Answer: A (electrical faults, hot work and poor control of flammables)
💡 Fires mostly stem from electrical faults, hot work and poor flammable-material control; these are the priorities.
✗
Question 42. How is an improperly kept Oil Record Book (ORB) treated in PSC?
Your Answer: (Not answered)
Correct Answer: C (a MARPOL deficiency, detention/penalty if serious)
💡 Incomplete or false ORB is a MARPOL Annex I deficiency, from rectification to detention/penalty.
✗
Question 43. For enclosed-space entry, hot work etc., the SMS requires?
Your Answer: (Not answered)
Correct Answer: B (permit, testing, stand-by and emergency readiness)
💡 Permit-to-work pins down hazards of high-risk work—a life-saving system.
✗
Question 44. What does the plastic discharge ban mean in garbage management?
Your Answer: (Not answered)
Correct Answer: A (no plastics of any kind may go into the sea; collect and deliver ashore)
💡 All plastics including ropes and packaging are banned from discharge; collect and land at reception facilities.
✗
Question 45. The purpose of periodic review of SMS documents is?
Your Answer: (Not answered)
Correct Answer: B (confirm they remain suitable and update with rules and ship changes)
💡 Reviews find clauses out of step with rules, equipment or practice so the documents do not decay into shelfware.
✗
Question 46. Ship-shore comms during a security incident should be?
Your Answer: (Not answered)
Correct Answer: C (confidential, concise, on designated channels, preventing leak or misleading)
💡 Leaked security comms endanger hostages and ops; keep controlled.
✗
Question 47. What are the compliance requirements for incineration?
Your Answer: (Not answered)
Correct Answer: A (use approved equipment for permitted categories, never burning plastics)
💡 Use an approved incinerator for permitted categories only; plastics and oil residues are banned, and operations must be logged.
✗
Question 48. The occupational hazards of enclosed-space work are?
Your Answer: (Not answered)
Correct Answer: D (combined risk of oxygen deficiency, toxic gas and flammability)
💡 Enclosed spaces combine asphyxiation, toxicity and flammability; test, ventilate and watch—missing one can kill.
✗
Question 49. To reduce human error, the SMS emphasises?
Your Answer: (Not answered)
Correct Answer: C (standard procedures, adequate rest, clear communication, just (non-punitive) reporting)
💡 Human-factor management is systemic, not individual; a just culture surfaces hazards.
✗
Question 50. Surveyors/technicians boarding for work require the SMS to?
Your Answer: (Not answered)
Correct Answer: D (register, safety brief, work permit and onboard supervision)
💡 Uncontrolled contractor work causes casualties; bring them into ship control.
✗
Question 51. What is a reasonable way to control fuel cost?
Your Answer: (Not answered)
Correct Answer: B (optimising speed, route and trim, hull cleaning and choosing bunkering ports)
💡 Control fuel safely through speed, routing, trim, hull condition and bunkering port selection, not just slow steaming.
✗
Question 52. What is the main protection against hull structural corrosion?
Your Answer: (Not answered)
Correct Answer: A (coating protection combined with sacrificial anodes or impressed current)
💡 Coating plus cathodic protection forms the system; anodes or impressed current protect coating breakdown areas.
✗
Question 53. What is required for meetings and handovers in a common language?
Your Answer: (Not answered)
Correct Answer: D (use the common language for key content and allow confirmation questions)
💡 Key content must use the common language with questions encouraged; dialects and side-talk lock information away.
✗
Question 54. The purpose of a designated ship-shore contact system is?
Your Answer: (Not answered)
Correct Answer: B (define counterparts, means and time limits to avoid delay)
💡 Named contacts with channels and escalation paths ensure swift decisions in emergencies.
✗
Question 55. The correct use of the echo sounder in shallow water is?
Your Answer: (Not answered)
Correct Answer: B (combine with tide and draught for under-keel clearance and set a shallow alarm)
💡 Combine sounding with tide, draught and squat to compute clearance and set alarms; never rely on one reading.
✗
Question 56. The relationship between the ISM annual audit and the intermediate audit?
Your Answer: (Not answered)
Correct Answer: B (annual maintains DOC, intermediate maintains the five-year SMC)
💡 The company DOC is audited annually; the ship SMC needs one intermediate audit in five years.
✗
Question 57. The autopilot is found letting the ship yaw off course slowly; what applies?
Your Answer: (Not answered)
Correct Answer: C (change to hand steering, find the cause and strengthen position checks)
💡 Autopilot faults cause gradual yaw; change to hand steering, find the cause and cross-check the position.
✗
Question 58. Key controls in changing over to low-sulphur fuel are?
Your Answer: (Not answered)
Correct Answer: A (control temperature and sequence, complete before entering the ECA and log it)
💡 Follow procedures managing temperature to avoid slugs and viscosity shock, completing before entry and logging it.
✗
Question 59. The core content of ISM Chapter 13 (Certification and Periodical Verification) is?
Your Answer: (Not answered)
Correct Answer: A (Administration or RO audits, certifies and supervises compliance)
💡 Chapter 13 covers initial, intermediate and renewal audits by the Administration/RO to certify and maintain compliance.
✗
Question 60. The correct external reporting contacts after an attack are?
Your Answer: (Not answered)
Correct Answer: B (regional piracy reporting centre, nearby navy, coastal State and company)
💡 Alert the regional reporting centre and nearby naval units, plus coastal State and company, with position and details.
✗
Question 61. What is the risk of using non-original substitute parts?
Your Answer: (Not answered)
Correct Answer: B (mismatch in performance and material may cause failure and affect survey and warranty)
💡 Substitutes need assessment of performance and material; otherwise failure at a critical moment and class or warranty problems.
✗
Question 62. The role of a Recognized Organization (RO) is?
Your Answer: (Not answered)
Correct Answer: B (authorised by flag to survey and certify; the company cooperates with its audits)
💡 ROs survey and certify on the flag's behalf including ISM/ISPS audits; companies cooperate and act on findings.
✗
Question 63. When the master or crew find a non-conformity, accident or hazardous situation, their first duty is?
Your Answer: (Not answered)
Correct Answer: A (promptly and truthfully report to the Company and record it in the designated SMS record)
💡 ISM Chapter 9 requires all non-conformities, accidents and hazardous situations to be reported to the Company and recorded.
✗
Question 64. At sea the charted depth differs from the echo sounder reading; what applies?
Your Answer: (Not answered)
Correct Answer: A (increase caution, slow down, report and divert to safe water if needed)
💡 Differences may come from old survey data or position error; slow, report, divert if needed and amend the data.
✗
Question 65. What condition allows in-water survey in lieu of drydocking?
Your Answer: (Not answered)
Correct Answer: D (agreed by class and carried out by an approved organisation under the required conditions)
💡 In-water survey in lieu needs class agreement and compliance with age, area and organisation requirements, not a unilateral choice.
✗
Question 66. Under the ISPS Code and the ship security plan, what counts as a "restricted area" on board?
Your Answer: (Not answered)
Correct Answer: A (security-sensitive spaces entry to which needs approval, such as the bridge, engine room, cargo control and fire control station)
💡 The test is security, not working safety: unauthorised entry to such spaces threatens navigation, the cargo or emergency response, so they are marked, locked, controlled by entry log, and manned at the higher security levels. A closed-up conversion space, a no-smoking corner and a port-side restricted area belong to other regimes.
✗
Question 67. When visibility improves, you should?
Your Answer: (Not answered)
Correct Answer: C (reassess, resume normal lookout and speed and log the sequence)
💡 Recheck targets and position, resume normal speed and lookout gradually and log the start and end of precautions.
✗
Question 68. The first measure when a suspected infectious case appears on board?
Your Answer: (Not answered)
Correct Answer: B (isolate immediately, report ashore, disinfect and protect per plan)
💡 Isolate, limit contact, notify company and next port, then disinfect, protect and monitor contacts per plan.
✗
Question 69. Continuous hull vibration occurs while in ice; you should?
Your Answer: (Not answered)
Correct Answer: C (slow and reduce load, inspect hull, propeller and rudder and withdraw if needed)
💡 Vibration may mean blade damage or hull pressure; slow, inspect propeller, rudder and spaces and withdraw for survey.
✗
Question 70. If the fire pump cannot deliver or the lifeboat engine won't start, PSC will?
Your Answer: (Not answered)
Correct Answer: D (raise a major non-conformity and may detain, safety equipment failed)
💡 Fire/life-saving gear failure is a major non-conformity with high detention risk.
✗
Question 71. In reconstructing a grounding, investigators first ask for the bell book. Its principal value lies in:
Your Answer: (Not answered)
Correct Answer: C (setting out, in time order, the engine orders from the bridge and when they were executed, so the sequence and intervals of stop and astern orders can be reconstructed)
💡 The bell book records orders and the moment they were executed; rpm, scavenge pressure and load belong to the engine room log, and fuel figures to consumption records — the first two options are the usual cross-wiring. In collision and grounding cases the interval between full ahead, stop and astern is often decisive.
✗
Question 72. Which input may management review not be missing?
Your Answer: (Not answered)
Correct Answer: C (audit findings, non-conformity trends, the analysis of casualties and detentions, and whether what the last review settled was done)
💡 The inputs it must be fed are already listed: the findings of internal and external audit, the number and trend of non-conformities, the investigation of casualties and near misses, the analysis of detentions, what the ships have raised, the weaknesses shown by drills, new demands from the authority or charterers, how far what the last review settled has been carried out, and the resources needed for it. What comes out is a conclusion on whether the system suits, covers enough and works, plus the documents to change - not turnover and attendance. Wages and budgets belong on another table; this review looks at the safety and pollution prevention line.
✗
Question 73. What is the inert gas system on a crude-oil tanker really there against?
Your Answer: (Not answered)
Correct Answer: A (it holds the oxygen content below 8 per cent and the tank under positive pressure, so the gas cannot be ignited)
💡 Of the three things a fire needs, inert gas takes away the oxygen: with the tank atmosphere held below 8% oxygen and under positive pressure, the hydrocarbon present can never reach a flammable range - and the positive pressure is what keeps outside air from being sucked back in, which is exactly what happens on a tank falling below atmospheric pressure while discharging. So oxygen and pressure are monitored continuously; a rising oxygen content, a falling pressure or loss of the deck water seal gives alarm and the related operation stops. A fault in the generator or flue-gas plant, or in the inertial and pressure/vacuum valves, is a major defect to be handled under the system, not smothered by pushing more gas through. Inert gas is not air for men to breathe: gas-freeing, oxygen testing and an entry permit come first.
✗
Question 74. The MLC principle governing repatriation is?
Your Answer: (Not answered)
Correct Answer: D (eligible seafarers get repatriation at no cost, generally borne by the shipowner)
💡 MLC guarantees repatriation at no cost to the seafarer, generally funded by the shipowner with financial security.
✗
Question 75. The role of information sharing among memoranda is?
Your Answer: (Not answered)
Correct Answer: D (makes deficiency and detention records visible across regions, preventing evasion)
💡 Shared data stops ships evading by changing trades and helps ports target high-risk vessels precisely.
✗
Question 76. The SMS consequence of falsifying records is?
Your Answer: (Not answered)
Correct Answer: A (destroys system integrity, escalating to major non-conformity and affecting certification)
💡 Falsification blinds the system and is treated as a major NC, risking certificate suspension and reputation.
✗
Question 77. The value of joint drills with shore or port is?
Your Answer: (Not answered)
Correct Answer: A (test ship-shore coordination and external interfaces, exposing gaps)
💡 Joint drills test reporting, comms and external aid, revealing interface gaps invisible in closed exercises.
✗
Question 78. How do outside investigations and the company's own stand related?
Your Answer: (Not answered)
Correct Answer: A (side by side and replacing neither: the internal search looks for root cause and amends the system, the external one settles liability and compliance)
💡 After a casualty several parties may be working at once: the flag or coastal State inquiry on liability and compliance, the association and the surveyor on loss and cover, charterers and cargo interests on where the damage came from, and the company on why the defence that should have held did not. The purposes differ, so do the methods and the papers, and none discharges another. The worth of the internal work is that it finds what to change in the documents, the training and the equipment, and it is not stopped because liability is awkward; nor is the internal report simply handed over - whether and in what form it goes is settled with legal advice and the association - while what the ship does is secure the evidence (records, alarms, instrument data, photographs, what people said) so the same paper is not altered until it proves nothing.
✗
Question 79. When planning the annual internal audit, one should consider?
Your Answer: (Not answered)
Correct Answer: A (ship risk profile, past non-conformities, certificate cycle, major changes)
💡 Risk- and history-based planning makes audits targeted, not ceremonial.
✗
Question 80. The difference between shore department and ship audits is?
Your Answer: (Not answered)
Correct Answer: A (shore covers process and resource support; ships cover execution and equipment)
💡 Shore audits examine process, resourcing and interfaces; ship audits examine practice, equipment and familiarisation.
✗
Question 81. What is the focus of an engine room watch handover?
Your Answer: (Not answered)
Correct Answer: D (running parameters, work in progress and abnormal alarms)
💡 Hand over parameters, maintenance and isolation status, alarms and unfinished work; omissions risk plant and personal accidents.
✗
Question 82. For suppliers of provisions, stores, bunkers, the SMS should?
Your Answer: (Not answered)
Correct Answer: B (vet competence, set acceptance standards, prevent contraband/unsafe items)
💡 Supplier control prevents bad stores and security hazards coming aboard.
✗
Question 83. The fundamental purpose of an SMS audit is NOT to?
Your Answer: (Not answered)
Correct Answer: A (pick faults to fine, but to verify effectiveness and improve)
💡 Audits are constructive—finding weaknesses to improve, not to punish.
✗
Question 84. Why is garbage sorted on board?
Your Answer: (Not answered)
Correct Answer: D (to enable lawful handling and shore reception and cut illegal discharge risk)
💡 Sorting is the prerequisite for lawful handling, letting each category follow its rule and cutting mis-discharge risk.
✗
Question 85. What is each of them, the certificate and the two declarations?
Your Answer: (Not answered)
Correct Answer: A (the certificate proves the ship meets the conditions; Part I states the flag requirements, Part II the measures the company takes)
💡 The certificate shows the ship has been verified against the Convention; the Declaration of Maritime Labour Compliance attached to it has two parts: Part I, issued by the flag state, saying how that state has turned the requirements into national terms; Part II, written by the company, saying how they are met on this ship - hours of work recorded, rest protected, medicines and equipment managed, complaints handled. The inspector reads Part II against what is actually done, and where the two disagree that is the deficiency. The certificate runs for five years at most with an intermediate inspection, while the declaration is revised with the system documents; both are carried on board, not held at the office.
✗
Question 86. Who normally owns the survey expiry alert?
Your Answer: (Not answered)
Correct Answer: A (shared by the company SMS owner and the master)
💡 The company keeps the register and books surveys; the master tracks validity and reminds the company.
✗
Question 87. Relieving, you find the ship half a mile off track toward shoal water at night. What should you do?
Your Answer: (Not answered)
Correct Answer: A (verify position, call the master, alter course for safety and report)
💡 Off-track toward danger at night is urgent: cross-check position, call the master, alter to safety and log.
✗
Question 88. After armed guards embark, what is the master's duty?
Your Answer: (Not answered)
Correct Answer: C (retain full command, clarify rules of force and guard areas)
💡 The master keeps command; agree rules of force and posts with the team leader, who does not control navigation.
✗
Question 89. Requirements for drawings and technical data on board are?
Your Answer: (Not answered)
Correct Answer: B (valid editions, complete, accessible and matching the actual ship)
💡 Drawings must reflect the ship after modifications, be current and accessible; wrong ones mislead in emergencies.
✗
Question 90. In port a crew member who has been drinking tries to enter the work area; what applies?
Your Answer: (Not answered)
Correct Answer: D (stop him entering, send him to rest and act under the alcohol policy)
💡 Entering the work area after drinking gravely threatens safety; stop him, apply the alcohol policy and record it.
✗
Question 91. When the master or key crew is temporarily absent, the SMS requires?
Your Answer: (Not answered)
Correct Answer: C (a designated competent substitute with handover, no duty vacuum)
💡 Key posts need an authorised competent back-up to avoid a command gap.
✗
Question 92. On a pollution incident, MARPOL requires?
Your Answer: (Not answered)
Correct Answer: D (mandatory report to the nearest coastal state and act per SOPEP)
💡 Mandatory reporting is a MARPOL duty; delay or concealment worsens liability.
✗
Question 93. The principle for slow or sailing vessels in traffic is?
Your Answer: (Not answered)
Correct Answer: C (not impede by slow speed or privilege, clear the route in time)
💡 Slow or privileged craft should still avoid impeding others and clear the way as needed.
✗
Question 94. What does a low insulation alarm indicate?
Your Answer: (Not answered)
Correct Answer: D (insulation has degraded with leakage, shock and fire risk)
💡 Degraded insulation comes from damp, ageing or damage; locate by circuit and eliminate it before further running.
✗
Question 95. The role of tide tables in voyage planning is?
Your Answer: (Not answered)
Correct Answer: D (determine times and heights for clearance and timing)
💡 Tide data underpins under-keel clearance calculations and the timing of transits over shoal areas.
✗
Question 96. Checking phase sequence before shore connection is?
Your Answer: (Not answered)
Correct Answer: A (a necessary connection check to prevent motors running in reverse)
💡 Wrong phase sequence reverses motors and damages plant; check sequence and earthing before connecting.
✗
Question 97. Power fails during cargo work in port; what applies?
Your Answer: (Not answered)
Correct Answer: A (stop work, close valves, start emergency power and find the cause)
💡 Stop and close valves to prevent spills, start emergency power for critical equipment and find the cause before resuming.
✗
Question 98. The role of lubricating oil analysis in machinery management is?
Your Answer: (Not answered)
Correct Answer: A (monitor wear metals, water and contamination to predict failure)
💡 Periodic sampling detects bearing wear, coolant ingress and fuel dilution early, enabling planned repair.
✗
Question 99. The usual validity of a SIRE inspection report is?
Your Answer: (Not answered)
Correct Answer: B (usable for about six months before re-inspection is needed)
💡 Reports are generally accepted within six months, after which a fresh inspection keeps vetting data current.
✗
Question 100. A crew training system usually consists of?
Your Answer: (Not answered)
Correct Answer: D (induction familiarisation, job skills, emergency drills and continuous development)
💡 A complete system covers familiarisation, job skills, emergency drills and ongoing development and refresher training.