Exam Home Website
中文 English
0
/100
FAIL
Correct: 0/100 Total Questions: 100 Time Spent: 60min0sec
Passing: 80
Retake History
Answer Review
✗
Question 1. For shipyard workers, surveyors etc. boarding, the SMS requires?
Your Answer: (Not answered)
Correct Answer: A (identity register, safety briefing, permit and supervision)
💡 Visitors must be brought into the SMS to prevent their work causing incidents.
✗
Question 2. During bunkering the supplier figures differ markedly from the ship's; you should?
Your Answer: (Not answered)
Correct Answer: C (pause and reconcile, retain samples and report to the company)
💡 Reconcile on the spot, seal joint samples, note reservations on documents and inform the company.
✗
Question 3. How to handle a failed competency assessment?
Your Answer: (Not answered)
Correct Answer: C (arrange retraining and reassessment, reassigning if necessary)
💡 Retrain and reassess; if still unfit, reassign or escalate so nobody unqualified holds a critical role.
✗
Question 4. Before transiting a high-risk piracy area, what preparation does the system require?
Your Answer: (Not answered)
Correct Answer: B (hardening and drills, reporting regime and emergency contacts plus reinforced watchkeeping)
💡 High-risk areas need hardening, drills, reporting and contacts plus lookout; speed is only one element.
✗
Question 5. The readability requirement for SMS documents shows in?
Your Answer: (Not answered)
Correct Answer: B (plain language, clear steps, understandable and actionable by users)
💡 Write for users: plain language, actionable steps, checklists and diagrams instead of verbosity nobody reads.
✗
Question 6. The Company's support for masters includes?
Your Answer: (Not answered)
Correct Answer: B (SMS training, decision authority, resources, no penalty for safety calls)
💡 Masters must be empowered and protected to make bold safety calls.
✗
Question 7. What does the plastic discharge ban mean in garbage management?
Your Answer: (Not answered)
Correct Answer: A (no plastics of any kind may go into the sea; collect and deliver ashore)
💡 All plastics including ropes and packaging are banned from discharge; collect and land at reception facilities.
✗
Question 8. When bunkering and cargo work run simultaneously, the management focus is?
Your Answer: (Not answered)
Correct Answer: B (clear responsibility, segregation and comms with emergency readiness)
💡 Assign owners, patrol, keep unified comms and ensure emergency stop and spill response are instantly available.
✗
Question 9. The basic concept of general average is?
Your Answer: (Not answered)
Correct Answer: B (extraordinary sacrifice or expense for common safety shared by beneficiaries)
💡 Deliberate sacrifice such as jettison for common safety is shared across ship, cargo and freight interests.
✗
Question 10. Liability for oil pollution damage is generally handled on which principle?
Your Answer: (Not answered)
Correct Answer: C (strict liability with compulsory insurance and direct action against the insurer)
💡 Under CLC the shipowner bears strict liability with compulsory financial security and direct action against insurers.
✗
Question 11. The surveyor asks to see SMS records during survey; the ship should?
Your Answer: (Not answered)
Correct Answer: D (provide genuine records and never fabricate or back-fill them)
💡 Records must be genuine; back-filling or falsifying escalates to a major non-conformity and damages credibility.
✗
Question 12. The OOW finds the ship off track with charted depths shoaling; he should?
Your Answer: (Not answered)
Correct Answer: A (verify position, call the master and alter towards deeper water)
💡 Cross-check position, call the master and alter to safety while monitoring depth and clearance.
✗
Question 13. Who first knows that something is wrong with the machinery?
Your Answer: (Not answered)
Correct Answer: B (the watchkeeper and those walking the rounds - whether they report and when decides whether the intervention comes before or after the failure)
💡 The first signs of a fault are usually with the watch, in the eye, ear and hand: temperature, vibration, a smell, a weep, a change of note. Whether they report and how quickly settles whether intervention falls before the failure or after it. What the system therefore has to supply is not feeling but a standard to judge by - the round sheet, the parameter limits - a report route that costs little to use, and an answer that shows the report went somewhere; after twice of reporting into silence nobody reports. An alarm covers only the quantities it was designed to see, and a sensor drifting or a part wasting below its threshold makes no sound. The monthly return shows averages, which is exactly the data that smooths an anomaly away.
✗
Question 14. The harm of retaliation against reporters is?
Your Answer: (Not answered)
Correct Answer: B (destroys reporting culture, driving hazards underground until accidents occur)
💡 Retaliation teaches silence; systemic hazards stay hidden until they surface as casualties at far greater cost.
✗
Question 15. Voyage orders should be?
Your Answer: (Not answered)
Correct Answer: B (issued in writing, within contract scope and consistent with the risk assessment)
💡 Orders must be written and within the charter; the master checks fitness, port limits and security aspects.
✗
Question 16. The treatment system alarms repeatedly due to turbid water; the watchkeeper should?
Your Answer: (Not answered)
Correct Answer: C (adjust or suspend treatment per procedure, report and record truthfully)
💡 High turbidity reduces treatment: follow maker procedures, record and report; never bypass alarms or discharge unlawfully.
✗
Question 17. The key to coordinating berthing with the terminal is?
Your Answer: (Not answered)
Correct Answer: C (confirm berth, tugs, lines and work plan in advance and keep aligned)
💡 Confirm berth, line order, tugs and work plan with terminal, pilot and tugs beforehand and keep everyone updated.
✗
Question 18. What is confirmed with the terminal before departure?
Your Answer: (Not answered)
Correct Answer: A (completion of cargo, signed documents and conditions for letting go lines)
💡 Confirm cargo is complete, documents are signed and conditions for letting go are met, coordinating tugs and sequence.
✗
Question 19. When a port window is tight, the correct approach is?
Your Answer: (Not answered)
Correct Answer: C (compute time against safe speed and advise early if unattainable)
💡 Compute time versus safe speed and tell the agent early if the window is missed rather than speeding.
✗
Question 20. Finding an expired hydrostatic release unit on a liferaft at sea; you should?
Your Answer: (Not answered)
Correct Answer: B (report the company and arrange replacement at the next port, monitoring meanwhile)
💡 Expired units compromise release; report, arrange replacement in port and ensure manual release is possible meanwhile.
✗
Question 21. High crew turnover's safety chain effect is?
Your Answer: (Not answered)
Correct Answer: C (lower familiarity, training pressure, experience gap)
💡 Turnover shrinks the experienced pool, raising risk via lower familiarity.
✗
Question 22. NOx emission control mainly targets?
Your Answer: (Not answered)
Correct Answer: B (diesel engines limited by Tier levels for NOx)
💡 Annex VI sets Tier I/II/III NOx limits for marine diesels, with Tier III in NOx ECAs.
✗
Question 23. A common cause of position offset on ECDIS is?
Your Answer: (Not answered)
Correct Answer: B (chart datum mismatch or missing antenna offset reference)
💡 Usually datum mismatch between chart and GNSS or an unconfigured antenna offset; verify both routinely.
✗
Question 24. On receiving a distress signal from another vessel/aircraft, the ship should?
Your Answer: (Not answered)
Correct Answer: B (proceed to assist unless own safety precludes, and report to RCC)
💡 Assisting distressed craft is a duty, unless own safety is at risk.
✗
Question 25. What applies to extra port services such as overtime or launch hire?
Your Answer: (Not answered)
Correct Answer: B (confirm necessity and rates beforehand and settle against documents afterwards)
💡 Confirm need and rates first and settle against documents, avoiding surprise high charges afterwards.
✗
Question 26. The purpose of escalating incident reports is?
Your Answer: (Not answered)
Correct Answer: C (ensure the right level commits resources, decides and bears external responsibility)
💡 Escalation brings the right authority and resources in, unifying external messaging and coordination responsibility.
✗
Question 27. The legal status of the ISM Code within the convention framework is?
Your Answer: (Not answered)
Correct Answer: A (implemented as Chapter IX of SOLAS)
💡 The ISM Code is given mandatory force through SOLAS Chapter IX (Management for the Safe Operation of Ships).
✗
Question 28. When using low sulphur fuel in an emission control area, what should be done?
Your Answer: (Not answered)
Correct Answer: A (change over in good time and keep bunker notes and changeover records)
💡 Changeover takes time and volume planning; do it early and keep bunker notes, logs and samples for inspection.
✗
Question 29. Where do the requirements for controlling vapour emission from a tanker's cargo come from?
Your Answer: (Not answered)
Correct Answer: A (the vapour control provisions of the pollution Annex, together with the rules of ports having recovery facilities)
💡 The air pollution provisions of the MARPOL Annex call for a vapour emission control plan on ships loading crude oil and for the tank pressures and releases to be worked to it, and a number of ports and local authorities, where a vapour receiving or recovery facility is provided, lay down terms of their own that are more specific still: before cargo work begins the lines, the valves and the pressure settings have to be shown to serve the arrangement required, and what is to be done when the shore will not take the vapour has to be settled beforehand. None of this comes from the life-saving, fire or lighting provisions, and it is not left to the company's discretion: venting to atmosphere when the recovery terms are not met is a deficiency waiting to be written and a cargo operation waiting to be stopped, with hot-work permits in the port drawn in after it. The Annex and the port rules together are what the ship works to.
✗
Question 30. Non-conformities raised by internal audit must be?
Your Answer: (Not answered)
Correct Answer: C (tracked to verified closure and analysed for patterns to improve the system)
💡 Closing and pattern-analysing findings is where internal audit adds value.
✗
Question 31. Failure of deck scuppers and freeing ports may lead to?
Your Answer: (Not answered)
Correct Answer: A (trapped water on deck reducing stability and endangering superstructure)
💡 Blocked freeing ports trap shipped water, raising G and adding free surface that weakens stability; keep clear.
✗
Question 32. In an emergency the master's decision bottom line is?
Your Answer: (Not answered)
Correct Answer: B (prioritise life, ship, environment over commercial loss)
💡 The maritime order: life > ship > environment > cargo/commerce.
✗
Question 33. Once the Document of Compliance is in hand, is the company finished?
Your Answer: (Not answered)
Correct Answer: D (keep it working effectively, holding internal audits, the intermediate verification and the renewal audit)
💡 Issue is only the start: the document is valid for five years at most, and in that time there must be internal audit, the intermediate verification falling between the second and third anniversaries, an annual endorsement, and a renewal audit at the end. What the renewal and intermediate audits look at is not whether the documents exist but whether the records and the practice on board agree. Taking on a new ship type or a bought-in vessel extends the document's scope as well, or that ship has no valid system behind it. Treating class survey as a substitute for the system audit merges two different jobs into one.
✗
Question 34. Finding missing fenders at the berth with no tugs available, the master should?
Your Answer: (Not answered)
Correct Answer: D (postpone berthing and report company and agent to improve conditions)
💡 Missing fenders and no tugs raise impact risk greatly; hold off, report and wait rather than force it.
✗
Question 35. The ship becomes fouled by fishing nets at sea; what applies?
Your Answer: (Not answered)
Correct Answer: B (stop to assess, report and take measures to clear it, avoiding blind manoeuvring)
💡 Blind manoeuvring worsens fouling and damages shafting; stop, assess, report and clear it safely.
✗
Question 36. The correct use of leading and lagging indicators is?
Your Answer: (Not answered)
Correct Answer: B (leading for early warning and prevention; lagging to verify results)
💡 Leading measures predict the future; lagging ones record the past. Use both for a full picture.
✗
Question 37. If an oil sheen is found and the ship is a suspect source, the first step is?
Your Answer: (Not answered)
Correct Answer: D (verify line-ups, valves and tank status and report to the master at once)
💡 Check for inadvertent discharge or leakage, report to the master and the coastal State, and preserve evidence.
✗
Question 38. Interim DOC / interim SMC may be used for?
Your Answer: (Not answered)
Correct Answer: A (short transition such as newbuilding takeover or reflagging, time-limited)
💡 Interim certificates bridge newbuilding takeover, new company or reflagging for limited periods.
✗
Question 39. How should fatigue and rest be managed with a multinational crew?
Your Answer: (Not answered)
Correct Answer: B (record rest uniformly under rules and the system and watch actual sleep quality)
💡 Apply one standard with honest records, and watch sleep quality and work patterns so compliance is real, not on paper.
✗
Question 40. What is the point of having a designated person at all?
Your Answer: (Not answered)
Correct Answer: C (a way for the master to reach past the ordinary levels when what business wants and what safety needs pull against each other)
💡 The provision sits in the elements of the system because the ship's business is driven by cargo and schedule, while a safety requirement costs money and spends a voyage, and if the matter can only travel up one level at a time the master is left alone between the two. The company is therefore to designate someone on the shore side who can reach top management directly, who is answerable for the system being worked and kept right on its ships, and who can be got at from the ship at whatever hour. The channel is not there to speed orders downwards but to give the safety side a way up that does not pass through the level that cares about the schedule: refusing to sail in an unfit condition, asking for a repair or for a change of hands, sending a hazard report, none of these going through the traffic end first. The master's responsibility has not moved to the shore - his authority and his judgement on board are stated in the Convention as before - and the designated man is neither the auditor nor a substitute for the review. Whether a company has the post in earnest can be judged by whether the master's reports reach top management by any other road, and by whose decision stands when the two pull against each other.
✗
Question 41. Requirements for periodic testing of the emergency generator are?
Your Answer: (Not answered)
Correct Answer: A (start and load test regularly and confirm automatic changeover)
💡 Start and load it periodically, verifying auto-start and changeover, and rehearse blackout scenarios.
✗
Question 42. Before the PSCO leaves, the master should?
Your Answer: (Not answered)
Correct Answer: B (obtain and keep a copy of the report noting deficiencies and deadlines)
💡 Get a report copy with deficiencies, deadlines and re-check details, start rectifying and notify the company.
✗
Question 43. Post heavy weather checks should include?
Your Answer: (Not answered)
Correct Answer: D (hull structure, cargo securing, deck equipment and watertight integrity)
💡 Inspect for structural damage, cargo shift, slack lashings and seal integrity of hatches and doors after storms.
✗
Question 44. Which is NOT a main factor in ship fuel consumption?
Your Answer: (Not answered)
Correct Answer: A (hull paint colour)
💡 Consumption depends on speed, draught, trim, fouling, propeller condition, weather and plant efficiency.
✗
Question 45. The correct way to correct an error in the deck logbook is?
Your Answer: (Not answered)
Correct Answer: C (strike through keeping the original legible, annotate and sign with date)
💡 Strike one line leaving the original readable, annotate and sign with date; never erase, tear or cover.
✗
Question 46. Alongside, the ship keeps moving off the berth; you should?
Your Answer: (Not answered)
Correct Answer: B (check line tension and fenders, adjust and inform the terminal)
💡 Usually slack lines or rising wind: adjust lines and fenders, add lines if needed and tell the terminal.
✗
Question 47. The typical sign of normalization of deviance is?
Your Answer: (Not answered)
Correct Answer: C (shortcuts gradually accepted as normal)
💡 Normalization of deviance is when small, uncorrected shortcuts become accepted routine, breeding major risk.
✗
Question 48. What is the purpose of version control?
Your Answer: (Not answered)
Correct Answer: A (ensure the current valid version is in use and obsolete ones are not)
💡 Numbering, effective dates and controlled distribution keep only current documents in use and withdraw obsolete ones.
✗
Question 49. The ISM Code makes the company establish emergency-preparedness procedures. What are they to cover?
Your Answer: (Not answered)
Correct Answer: B (the foreseeable emergencies — collision, grounding, fire, casualty, oil spill, abandon ship)
💡 The emergency-preparedness section asks the company to identify: the emergencies that ship, area and cargo can meet, a plan for each with duties, communications and resources, drills to prove the plan works, and the drill findings fed back into revision. Substituting piracy for every case, letting a port State defect list stand in for identification, or trimming drills when they inconvenience, all leave the procedure on paper.
✗
Question 50. To test real capability, drills should occasionally?
Your Answer: (Not answered)
Correct Answer: A (be unannounced with injected variables to test improvisation)
💡 Surprise drills expose plan gaps and real skill—an improvement chance.
✗
Question 51. How should the SMS handle flag State circulars and marine notices?
Your Answer: (Not answered)
Correct Answer: A (assess applicability, add to controlled list and brief for implementation)
💡 Flag circulars carry mandatory or advisory content; assess, list, revise procedures and train to avoid gaps.
✗
Question 52. What pollution precautions apply while alongside?
Your Answer: (Not answered)
Correct Answer: B (plug deck scuppers, have booms ready and monitor lines)
💡 Plug scuppers, stage booming equipment and monitor lines and valves so even small leaks do not reach the sea.
✗
Question 53. The purpose of a NAVTEX receiver is to?
Your Answer: (Not answered)
Correct Answer: B (automatically receive and print navigational and meteorological warnings)
💡 NAVTEX broadcasts coastal safety information automatically on 518 kHz and other designated frequencies.
✗
Question 54. What is the master's core duty under the system?
Your Answer: (Not answered)
Correct Answer: A (implement and maintain the system on board, make sure the crew know their posts, report deficiencies to the company)
💡 The Code gives the master two things to do: state how the safety and pollution-prevention policy lands on this ship, and implement and maintain the system on board - make every seafarer familiar with his duties and procedures, report deficiencies and improvement suggestions to the company as they are, and review at intervals how the system is actually working on board. That is set out in the section on the master's responsibilities and is not discharged by signing. Handing the system to the chief officer to keep the files tidy, letting the shore run it, or treating good navigation as the whole duty leaves the driving link empty ashore-to-ship - and it is that link that keeps the ship out of trouble.
✗
Question 55. Which operations are the critical ones that call for special control?
Your Answer: (Not answered)
Correct Answer: B (navigation in confined waters and in restricted visibility, heavy-weather handling, transfer of oil and entry into enclosed spaces)
💡 Critical operations are those where a mistake endangers people, the ship or the environment at once, and the company is to pick them out and write, for each, a procedure the ship can actually follow: navigation in confined waters and in fog, the relief of the watch and how the lookout is set, berthing and the use of tugs, cargo work and the transfer of oil, entry into enclosed spaces and hot work, work aloft and over the side, ballasting and the changes in stability. The control is the standing of duty, permit, check and record — what is examined and approved before the job, who watches, and how the job can be stopped — not the memory of an experienced man. Filed together with paperwork and the cleaning rota, the procedures lose all sense of risk and give nothing for an auditor to follow.
✗
Question 56. If abnormal deformation is found during hull inspection, what applies?
Your Answer: (Not answered)
Correct Answer: A (record position and size, photograph and report company and class for assessment)
💡 Deformation may mean buckling or overload; record, report and have it assessed, never handle it yourself or delay.
✗
Question 57. The barge supplying fuel lacks proper documentation; you should?
Your Answer: (Not answered)
Correct Answer: D (refuse and require compliant documents before starting)
💡 Without proper papers there is compliance and claim risk; refuse until quantity and quality documents are provided.
✗
Question 58. What is special about work on high voltage equipment?
Your Answer: (Not answered)
Correct Answer: C (specialist training and authorisation, dedicated tools and a permit-to-work)
💡 High voltage carries arc-flash risk; only authorised staff with dedicated tools and permits may work on it.
✗
Question 59. If documents differ from reality, for example in bill of lading quantities, the master should?
Your Answer: (Not answered)
Correct Answer: A (verify, refuse to sign false documents and report the company)
💡 Documents signed by the master carry legal effect; verify, refuse false content and report for instructions.
✗
Question 60. If the pilot does not board at the agreed position, the master should?
Your Answer: (Not answered)
Correct Answer: D (contact to confirm, assess safety and re-arrange the boarding point if needed)
💡 Contact to confirm, assess safety and decide whether to wait or adjust; never act unilaterally.
✗
Question 61. A tanker Shipboard Oil Pollution Emergency Plan (SOPEP) must contain?
Your Answer: (Not answered)
Correct Answer: A (reporting procedure, spill steps, contacts, shore coordination)
💡 SOPEP must have reporting, response steps, equipment and contact lists; it is statutory and PSC-checked.
✗
Question 62. What is key to cohesion in a multinational team?
Your Answer: (Not answered)
Correct Answer: C (fair treatment, clear standards and shared involvement in safety)
💡 Fairness and clear standards build cohesion; involving all ranks in safety improvement strengthens belonging and ownership.
✗
Question 63. A crew member is found using an open flame in breach of rules; what applies?
Your Answer: (Not answered)
Correct Answer: A (stop it at once, remove the source and act under procedure with training)
💡 Illegal open flame easily starts fires; stop it, remove the source and act under discipline and training to prevent repeat.
✗
Question 64. No abandon-ship drill records exist for a long period; on taking over the master should?
Your Answer: (Not answered)
Correct Answer: C (hold a drill at once, record it, find the cause and report to the company)
💡 Run and record a genuine drill, investigate why records lapsed and report; never just back-fill paperwork.
✗
Question 65. When the master has safety concerns about voyage instructions, he should?
Your Answer: (Not answered)
Correct Answer: D (raise the concern for company review while retaining final authority)
💡 The master raises concerns; the company assesses or amends. The master's final safety authority stands.
✗
Question 66. The focus of security patrols is?
Your Answer: (Not answered)
Correct Answer: D (check restricted areas, access points, gangway and unusual persons or items)
💡 Patrols cover restricted doors, gangway and lines, blind decks and suspicious people or objects, logged at set intervals.
✗
Question 67. If a ship fails PSC re-inspection after deficiencies, the consequence is?
Your Answer: (Not answered)
Correct Answer: B (stay detained with possible expanded inspection until cleared)
💡 Failed re-check means inadequate fixes; detention continues with closer scrutiny and higher cost.
✗
Question 68. The value of simulator training is?
Your Answer: (Not answered)
Correct Answer: B (practise decisions and actions for high-risk or rare scenarios safely)
💡 Simulators recreate casualties and extremes, letting crews practise judgement safely where drills cannot reach.
✗
Question 69. Ballast water management must follow?
Your Answer: (Not answered)
Correct Answer: B (the BWM Convention: exchange or treat, logged in the Ballast Water Record Book)
💡 Ballast water spreads invasive species; treat per D-1/D-2 and record properly.
✗
Question 70. If off track is noticed during watch handover, one should?
Your Answer: (Not answered)
Correct Answer: B (verify position, inform the master and take corrective action)
💡 Confirm position, assess danger, inform the master and correct before the situation develops.
✗
Question 71. Navigation equipment is found out of time synchronisation at sea; what applies?
Your Answer: (Not answered)
Correct Answer: B (correct to a common time base at once, record it and find the cause)
💡 Unsynchronised time corrupts records and collision assessment; unify the time base, record and find the cause.
✗
Question 72. The master's statement/report after a casualty should?
Your Answer: (Not answered)
Correct Answer: D (objective, timely, complete facts and decisions, no premature blame)
💡 The master records objective facts and decisions promptly; liability is for the inquiry, not the statement.
✗
Question 73. Sources of equipment reliability data are?
Your Answer: (Not answered)
Correct Answer: C (failure and maintenance records, maker's data and industry sharing)
💡 Combine own failure and maintenance records with maker and fleet data, not brochures or impressions.
✗
Question 74. The purpose of periodic review of SMS documents is?
Your Answer: (Not answered)
Correct Answer: B (confirm they remain suitable and update with rules and ship changes)
💡 Reviews find clauses out of step with rules, equipment or practice so the documents do not decay into shelfware.
✗
Question 75. Main engine fails in a channel with a large vessel close astern; you should?
Your Answer: (Not answered)
Correct Answer: A (show NUC signals, alert VTS and the ship astern and try to hold position)
💡 Show NUC signals, inform VTS and the vessel astern, and use remaining speed and anchors to hold position.
✗
Question 76. The role of Vessel Traffic Services is?
Your Answer: (Not answered)
Correct Answer: C (provide traffic information and advice, assisting but not relieving the master)
💡 VTS gives information and coordination advice, but command and decisions remain with the master.
✗
Question 77. In fog a target ahead shows slowly changing bearing; you should?
Your Answer: (Not answered)
Correct Answer: A (stay alert, keep plotting and take early substantial action if needed)
💡 A slowly changing bearing can still become dangerous; keep plotting and assess CPA, acting early and substantially.
✗
Question 78. A crew member absent without authority or leaving the ship unwatched is?
Your Answer: (Not answered)
Correct Answer: B (a breach of discipline and safety duty, handled and reported per SMS)
💡 Unauthorised absence breaks watch and safety; the SMS needs discipline and reporting.
✗
Question 79. What is the key step in accepting stores and spares?
Your Answer: (Not answered)
Correct Answer: C (check specification, model and certificates, inspect condition and quantity and sign)
💡 Acceptance checks specification, model, certificates, condition and quantity, preventing counterfeit parts on board.
✗
Question 80. Who normally decides on medical evacuation?
Your Answer: (Not answered)
Correct Answer: A (decided by the master on medical advice, coordinated with the company)
💡 The master decides on medical advice plus conditions and position, coordinating evacuation with the company.
✗
Question 81. What is the value of pilot reports and incident records?
Your Answer: (Not answered)
Correct Answer: B (objective basis for analysis, apportionment and improvement)
💡 Pilot records reconstruct operations objectively and support analysis and improvement; keep them and feed them into the system.
✗
Question 82. To ensure crew competence for safety and pollution prevention, ISM requires the Company to?
Your Answer: (Not answered)
Correct Answer: B (provide training and maintain familiarity with duties)
💡 Rule 6: the Company must ensure crew are trained and familiar with their duties, including new/transferred personnel.
✗
Question 83. A crew member entering a tank without gas test or watch, then poisoned, exposes?
Your Answer: (Not answered)
Correct Answer: A (permit-to-work and stand-by system not implemented)
💡 Enclosed-space entry needs permit, test and watch; omission means a dead procedure.
✗
Question 84. When conflict between crew escalates, the master should?
Your Answer: (Not answered)
Correct Answer: A (intervene, investigate, separate the parties and act under procedure)
💡 Unresolved conflict harms teamwork and safety; investigate, separate parties and act under disciplinary and grievance procedures.
✗
Question 85. The Company may delegate tasks, but it cannot delegate?
Your Answer: (Not answered)
Correct Answer: A (its ultimate responsibility for safety and pollution prevention)
💡 Duties may be delegated, but ultimate accountability stays with the Company.
✗
Question 86. What is the value of standard marine communication phrases?
Your Answer: (Not answered)
Correct Answer: C (reduce ambiguity so speakers of different mother tongues exchange key information accurately)
💡 Standard phrases carry key information in fixed form, cutting ambiguity across languages and safeguarding communications.
✗
Question 87. The relationship between SOLAS Chapter IX and the ISM Code?
Your Answer: (Not answered)
Correct Answer: B (SOLAS Chapter IX makes ISM mandatory)
💡 SOLAS Chapter IX incorporates the ISM Code, making it mandatory for applicable ships.
✗
Question 88. The main risk of alternate hold loading on bulk carriers is?
Your Answer: (Not answered)
Correct Answer: B (increased loads on hatch covers and tank tops with structural damage risk)
💡 Alternate loading raises tank top and hatch loads and longitudinal stress; verify strength and follow the rules.
✗
Question 89. The master's absolute safety power also means?
Your Answer: (Not answered)
Correct Answer: B (ultimate responsibility for safety/pollution, power matched by accountability)
💡 Power and accountability are matched; the master decides and owns the outcome.
✗
Question 90. Crew report a fuel smell and oil traces in the engine room; you should?
Your Answer: (Not answered)
Correct Answer: D (find the leak, increase ventilation and remove ignition sources)
💡 Fuel leaks are a fire hazard: find and stop it, ventilate, remove ignition sources and inform the chief engineer.
✗
Question 91. The purpose of read-back of orders on the bridge is?
Your Answer: (Not answered)
Correct Answer: C (confirm correct reception and avoid mishearing or misunderstanding)
💡 Read-back lets the giver verify the order landed correctly, vital under noise, accents and stress.
✗
Question 92. How does damage stability differ from intact stability?
Your Answer: (Not answered)
Correct Answer: C (damage stability considers residual stability and floating condition after flooding)
💡 Damage stability assesses residual stability and attitude after assumed flooding, the basis of subdivision and damage control.
✗
Question 93. Execution of critical operations (e.g. enclosed-space entry, bunkering) shall be?
Your Answer: (Not answered)
Correct Answer: C (record key steps and confirmations per instruction)
💡 Critical operations require recorded steps and sign-offs for verification and traceability.
✗
Question 94. In fog a fog signal is heard near the beam and very close; you should?
Your Answer: (Not answered)
Correct Answer: D (slow or stop at once, act cautiously and avoid blind alteration)
💡 A close signal means a vessel is nearby; slow or stop first since blind turns may collide.
✗
Question 95. A crew member refuses to carry out a safety order; the master should?
Your Answer: (Not answered)
Correct Answer: C (find out why, stop him working if needed and act under procedure)
💡 Control the risk, find the reason and act under disciplinary procedure while keeping records and evidence.
✗
Question 96. The risk of an on-load release mechanism is?
Your Answer: (Not answered)
Correct Answer: B (improper operation may release under load and drop the boat)
💡 On-load releases must be reset and secured; misuse drops the boat, so training and double checks are vital.
✗
Question 97. The Master's review and reporting obligation for the SMS is?
Your Answer: (Not answered)
Correct Answer: D (periodically review the SMS and report deficiencies to the Company)
💡 Rule 5.1.5: the Master shall periodically review the SMS and report any deficiencies to the Company.
✗
Question 98. What mainly determines whether a spare is critical?
Your Answer: (Not answered)
Correct Answer: D (whether failure would cause loss of control, detention or an accident)
💡 Critical spares are judged by consequence: propulsion, steering, fire, lifesaving and pollution prevention.
✗
Question 99. The correct sequence after an engine alarm sounds is?
Your Answer: (Not answered)
Correct Answer: A (acknowledge, find cause, act and record)
💡 Acknowledge and verify location, judge false or real, act accordingly and log times, actions and results.
✗
Question 100. Routine measures against stowaways and illegal boarding include?
Your Answer: (Not answered)
Correct Answer: A (control access, patrol and record all boarders alongside or at anchor)
💡 Control gangways and lines, keep watches and lighting, log boarders and search thoroughly before departure.