Exam Home Website
中文 English
0
/100
FAIL
Correct: 0/100 Total Questions: 100 Time Spent: 60min0sec
Passing: 80
Retake History
Answer Review
✗
Question 1. To whom is the Safety Management Certificate (SMC) issued?
Your Answer: (Not answered)
Correct Answer: B (issued to an individual ship with an effective SMS)
💡 The SMC is issued per ship after initial/intermediate/renewal audit, typically valid five years.
✗
Question 2. What is required for storing paints and chemicals?
Your Answer: (Not answered)
Correct Answer: C (dedicated spaces, ventilated and fire safe, with protective and spill equipment)
💡 Flammable and harmful stores need dedicated ventilated fire-safe spaces with labels, PPE and spill kits.
✗
Question 3. An anchor watch should primarily monitor?
Your Answer: (Not answered)
Correct Answer: B (dragging, cable strain, position changes and nearby traffic)
💡 Watch position for dragging, cable direction/strain and approaching traffic while yawing.
✗
Question 4. The role of "clear grounds" in PSC inspection is?
Your Answer: (Not answered)
Correct Answer: A (the trigger for conducting a more detailed inspection)
💡 Clear grounds such as evident disrepair or system failure justify expanding into a detailed inspection.
✗
Question 5. Which level does each of them govern, procedure and instruction?
Your Answer: (Not answered)
Correct Answer: C (the procedure says who does it, when it is done and how departments meet; the instruction says how this step is performed)
💡 Documentation is usually layered: the manual states the policy and the commitments; procedures answer who does it, when, how departments interface and where the record is kept; instructions and notices answer how the particular step is performed, how far a valve is opened, what goes in which box; forms are the evidence that it was done. The layers differ not in style but in responsibility - a procedure changes after review at company level, while an instruction may only need the order of one step adjusted on board for the equipment actually fitted, and even that is controlled and issued by version to the post that uses it. To call an instruction an abridged procedure loses that control relationship.
✗
Question 6. The most direct evidence that an SMS is effective is?
Your Answer: (Not answered)
Correct Answer: D (falling incidents/detentions and verifiable emergency capability)
💡 Effectiveness shows in falling incidents/detentions and verifiable emergency capability, not document volume.
✗
Question 7. Effective management review inputs typically include?
Your Answer: (Not answered)
Correct Answer: B (audit results, non-conformity trends, casualties/near misses, KPIs, changes)
💡 Data-driven inputs keep review decisions objective.
✗
Question 8. Before entering port the pilot ladder is found damaged; what applies?
Your Answer: (Not answered)
Correct Answer: B (replace or repair it and report; it must not be used while defective)
💡 A defective pilot ladder risks injury, complaints and detention; replace or repair, report and confirm it is serviceable.
✗
Question 9. The purpose of a toolbox talk before high-risk work is?
Your Answer: (Not answered)
Correct Answer: D (brief risks, roles and emergency measures and confirm understanding)
💡 A short briefing clarifies hazards, duties, protection and emergency steps for all at low cost and high value.
✗
Question 10. Failure of deck scuppers and freeing ports may lead to?
Your Answer: (Not answered)
Correct Answer: A (trapped water on deck reducing stability and endangering superstructure)
💡 Blocked freeing ports trap shipped water, raising G and adding free surface that weakens stability; keep clear.
✗
Question 11. A new crew member still unaware of alarms/duties after a week is a?
Your Answer: (Not answered)
Correct Answer: A (familiarisation non-conformity, breaching ISM Chapter 6)
💡 Chapter 6 requires competence and familiarisation; ignorance hurts safety directly.
✗
Question 12. What is an emergency measure for insufficient stability?
Your Answer: (Not answered)
Correct Answer: A (lower the centre of gravity, reduce free surface and control heeling moments)
💡 Ballast low, empty high tanks and cut slack tanks while limiting operations that create heel.
✗
Question 13. The effect of the radar close-range blind zone is?
Your Answer: (Not answered)
Correct Answer: B (very close targets may show poorly; sight and hearing must compensate)
💡 Radar misses very close targets, so visual lookout and listening matter in berthing and crowded waters.
✗
Question 14. What is the key to fuel changeover?
Your Answer: (Not answered)
Correct Answer: D (controlling the rate of temperature change to avoid thermal shock and wax)
💡 Control heating and cooling rates during changeover to avoid thermal shock, filter clogging and pump sticking.
✗
Question 15. After armed guards embark, what is the master's duty?
Your Answer: (Not answered)
Correct Answer: C (retain full command, clarify rules of force and guard areas)
💡 The master keeps command; agree rules of force and posts with the team leader, who does not control navigation.
✗
Question 16. The management key when several statutory regimes coexist is?
Your Answer: (Not answered)
Correct Answer: A (integrate into one SMS register, avoiding fragmented control)
💡 Put all statutory documents and records in one register with owners and validity, avoiding fragmentation.
✗
Question 17. Why does a charterer take an interest in crew changeover?
Your Answer: (Not answered)
Correct Answer: A (a rotating crew means a green crew, no team feel, and more risk with it)
💡 Safe shiphandling rests on familiarity and team-worn habits: how this ship answers her helm, where her equipment is and how it misbehaves, who does what in each procedure, the language and the call-and-response routines - all of it takes time to build. A high changeover spends that time on relief, handover and re-familiarising, so teamwork and emergency response fall off and mistakes rise in the delicate work of cargo, ballage and tank cleaning. Charterers, underwriters and port states read it as an indirect measure of management: a ship in constant rotation usually also means thin manning, weak training and a system applied in name, which is why it enters vetting and risk assessment. It is not in the freight formula and it is not merely a headcount figure.
✗
Question 18. What does the system require for reporting non-conformities and accidents?
Your Answer: (Not answered)
Correct Answer: D (report promptly, investigate and analyse and take corrective action)
💡 Reporting feeds improvement: report promptly, find root causes and correct, not only major cases or annual summaries.
✗
Question 19. What is the key requirement of fuel consumption reporting schemes?
Your Answer: (Not answered)
Correct Answer: B (data that is true, complete, verifiable and submitted on time)
💡 Carbon data is compliance data: measure reliably, keep evidence, and never estimate or back-fill.
✗
Question 20. With electronic logs (e-logbook), the key is?
Your Answer: (Not answered)
Correct Answer: B (tamper-proof, audit trail, loss-proof backup)
💡 Electronic records must be tamper-proof and traceable to hold as evidence.
✗
Question 21. The SMS response when a ship is arrested is?
Your Answer: (Not answered)
Correct Answer: D (notify company and club at once, cooperate and protect those aboard)
💡 Report at once so the club arranges security and lawyers while shipboard order, manning and watches continue.
✗
Question 22. Engine-room fire root causes in the SMS are often?
Your Answer: (Not answered)
Correct Answer: A (poor maintenance, hot work without permit, failed detection, weak drills)
💡 Fires are preventable; failure lies in maintenance and work permits.
✗
Question 23. Smoke from self-heating cargo is found during discharge; you should?
Your Answer: (Not answered)
Correct Answer: D (stop work, seal and inert or apply water per plan and seek expert advice)
💡 Stop, seal and inert or fight carefully per the cargo emergency procedure, and seek expert advice ashore.
✗
Question 24. Corrective actions for a non-conformity should follow the principle of?
Your Answer: (Not answered)
Correct Answer: A (eliminating the root cause, preventing recurrence, and verifying closure)
💡 Effective corrective action removes the root cause and is verified closed; cosmetic fixes get re-raised at review.
✗
Question 25. What is the basic concept of general average?
Your Answer: (Not answered)
Correct Answer: D (extraordinary sacrifice or expenditure for common safety, shared by all interests)
💡 General average covers deliberate sacrifice for common safety, apportioned among ship, cargo and freight interests.
✗
Question 26. What determines the tug plan for berthing and unberthing?
Your Answer: (Not answered)
Correct Answer: C (ship size, wind and current, and berth conditions together)
💡 Tug numbers follow ship size, wind, current and berth with margin, not a fixed custom.
✗
Question 27. How do outside investigations and the company's own stand related?
Your Answer: (Not answered)
Correct Answer: A (side by side and replacing neither: the internal search looks for root cause and amends the system, the external one settles liability and compliance)
💡 After a casualty several parties may be working at once: the flag or coastal State inquiry on liability and compliance, the association and the surveyor on loss and cover, charterers and cargo interests on where the damage came from, and the company on why the defence that should have held did not. The purposes differ, so do the methods and the papers, and none discharges another. The worth of the internal work is that it finds what to change in the documents, the training and the equipment, and it is not stopped because liability is awkward; nor is the internal report simply handed over - whether and in what form it goes is settled with legal advice and the association - while what the ship does is secure the evidence (records, alarms, instrument data, photographs, what people said) so the same paper is not altered until it proves nothing.
✗
Question 28. Why is a cargo pump room kept under continuous mechanical ventilation with a level alarm on its bilge well?
Your Answer: (Not answered)
Correct Answer: D (ventilation keeping gas below a dangerous concentration, the level alarm catching a leaking seal or water ingress)
💡 A pump room is an enclosed space in which shaft seals, flanges and gauge lines will leak a little, so gas accumulates unless air is changed, which is why ventilation runs through cargo operations at the required number of changes. The level alarm on the bilge well is there to speak up early when a seal leaks or oil or water finds its way in, giving the watch a chance to act before the room floods and more flammable liquid gathers. To read either as cooling for the pumps, as room to work in, or as a matter of discharge rate puts their purpose elsewhere. Entry remains subject to the enclosed space procedure, testing the atmosphere and the permit.
✗
Question 29. A fresh water tank is found contaminated; what applies?
Your Answer: (Not answered)
Correct Answer: D (stop using the tank, trace the contamination and disinfect to keep drinking water safe)
💡 Contaminated water threatens health; stop using the tank, trace and clean and disinfect, seeking shore support if needed.
✗
Question 30. The correct way to enter a space to investigate a fire is?
Your Answer: (Not answered)
Correct Answer: B (stay low, test door temperature first and operate in pairs)
💡 Test the door with the back of the hand, open slightly, enter low with communications and support outside.
✗
Question 31. In port an open ballast tank manhole is found; what applies?
Your Answer: (Not answered)
Correct Answer: B (close it at once, find why and assess flooding and pollution risk)
💡 An open manhole risks flooding and stability; close it, find the cause and assess any ingress or pollution.
✗
Question 32. Availability assurance for GMDSS equipment normally requires?
Your Answer: (Not answered)
Correct Answer: A (shore maintenance, at-sea electronic maintenance or duplication of equipment)
💡 Availability is assured by shore maintenance agreements, onboard electronic maintenance or duplicated equipment.
✗
Question 33. The consequence of trading with an expired certificate is?
Your Answer: (Not answered)
Correct Answer: B (illegal trading, detention, fines and insurance/port issues)
💡 Operating with expired certificates draws detention, fines and insurance consequences.
✗
Question 34. A crew member lacks a valid medical certificate while in port; you should?
Your Answer: (Not answered)
Correct Answer: B (report the company and arrange examination, no watch until cleared)
💡 Without a valid medical the seafarer is not fit; report, arrange examination and keep him off watch until cleared.
✗
Question 35. A sign of Company SMS maturity is?
Your Answer: (Not answered)
Correct Answer: C (moving from passive compliance to proactive risk management)
💡 Mature systems treat safety as a strength, not a burden.
✗
Question 36. When equipment, routes or regulations change affecting a critical operation, the instruction shall?
Your Answer: (Not answered)
Correct Answer: A (be reviewed/updated promptly and re-trained)
💡 Document control requires timely update and re-familiarization, preventing use of obsolete versions (Rule 11).
✗
Question 37. A crew member absent without authority or leaving the ship unwatched is?
Your Answer: (Not answered)
Correct Answer: B (a breach of discipline and safety duty, handled and reported per SMS)
💡 Unauthorised absence breaks watch and safety; the SMS needs discipline and reporting.
✗
Question 38. A repeated non-conformity usually indicates?
Your Answer: (Not answered)
Correct Answer: C (earlier corrective action failed or missed the root cause)
💡 A repeat NC means the prior fix was superficial; restart RCA and strengthen verification.
✗
Question 39. The DPA must guarantee?
Your Answer: (Not answered)
Correct Answer: D (the ship can reach him at any time, including off-hours)
💡 24/7 reachability is mandatory; otherwise the emergency link breaks.
✗
Question 40. The reporting chain for a security threat is?
Your Answer: (Not answered)
Correct Answer: A (watchkeeper, SSO, master, CSO and shore authorities)
💡 Escalate to SSO and master, who reports company and coastal authorities while applying SSP measures.
✗
Question 41. Does the Company's ultimate responsibility for safety/pollution transfer when management is delegated?
Your Answer: (Not answered)
Correct Answer: B (No; the Company retains ultimate responsibility)
💡 ISM makes clear that even when management is delegated, the responsible Company retains ultimate responsibility.
✗
Question 42. What PSC most often checks in pollution prevention is?
Your Answer: (Not answered)
Correct Answer: D (true continuous records, serviceable equipment, current plans, drills done)
💡 Pollution compliance shows in records, equipment, plans and drills.
✗
Question 43. The internal audit frequency should generally satisfy?
Your Answer: (Not answered)
Correct Answer: A (company ashore units and each ship at least annually, key departments more often)
💡 ISM 12 requires periodic internal audits; practice means annual coverage of ashore units and each ship.
✗
Question 44. Onboard repairs with hot work, enclosed space etc. require the SMS to?
Your Answer: (Not answered)
Correct Answer: A (permits, stand-by and joint yard/ship safety supervision)
💡 Repair-period accidents spike; joint supervision is mandatory.
✗
Question 45. What is required for the security interface with a port facility?
Your Answer: (Not answered)
Correct Answer: B (exchange security information as required and sign a declaration or confirm levels)
💡 Ship and facility exchange security information and sign a declaration where required, defining duties and restricted areas.
✗
Question 46. A mis-handled low-sulphur fuel changeover causes non-compliant fuel use; you should?
Your Answer: (Not answered)
Correct Answer: C (log facts, report company and flag and correct the procedure)
💡 Record honestly, report to company and flag, find the procedural gap and revise instructions and training.
✗
Question 47. When raising a non-conformity, the auditor should?
Your Answer: (Not answered)
Correct Answer: D (state clear facts, cite the clause and give the basis)
💡 State the facts, the clause or procedure breached and the basis so the auditee can act specifically.
✗
Question 48. Audit concern when the company fails to supply adequate spares is?
Your Answer: (Not answered)
Correct Answer: A (resource non-conformity showing inadequate support under Chapter 6)
💡 Missing spares breach the resource duty and risk breakdown or detention; fix procurement, not push it to the ship.
✗
Question 49. After new equipment is fitted, the SMS should?
Your Answer: (Not answered)
Correct Answer: B (update procedures and training, revise drawings and add it to the PMS)
💡 Update instructions, drawings and the PMS and train the crew, or a management gap appears immediately.
✗
Question 50. Which spaces count as enclosed?
Your Answer: (Not answered)
Correct Answer: D (double bottoms, voids, the pump room, the carbon dioxide room and cargo holds - places where air does not change)
💡 The test is not size or whether there is a door, but whether the air changes with the outside and what may be waiting inside: lack of oxygen (long unventilated, consumed by rust and oil, or by the cargo itself), toxic gas (cargo vapour, hydrogen sulphide, residue from the fire smothering gas), flammable gas, and structure that makes coming out difficult. So double bottoms, voids, wing tanks, pump rooms, the carbon dioxide room, cargo holds, cofferdams and slop tanks are inside the definition, while a control room or an open walkway with normal ventilation and a normal way out is not. Entry goes through a permit: gas tested, ventilated, someone standing by, rescue arrangement in place, each line signed.
✗
Question 51. Under the action codes, which deficiency must be rectified before departure?
Your Answer: (Not answered)
Correct Answer: B (deficiencies seriously endangering safety, health or the environment)
💡 Code 30 items must be fixed before sailing; others get deadlines, next port or fourteen days.
✗
Question 52. On receiving a distress signal from another vessel/aircraft, the ship should?
Your Answer: (Not answered)
Correct Answer: B (proceed to assist unless own safety precludes, and report to RCC)
💡 Assisting distressed craft is a duty, unless own safety is at risk.
✗
Question 53. With tugs assisting berthing, the master should?
Your Answer: (Not answered)
Correct Answer: D (define tug positions and orders, unify communications and keep control of the situation)
💡 Tugs assist only; the master gives clear orders, keeps communications and retains overall control.
✗
Question 54. How are improvement results locked in?
Your Answer: (Not answered)
Correct Answer: B (revise SMS documents, add to training and checklists and keep monitoring)
💡 Write into procedures, train and checklists and keep monitoring, or gains fade with crew turnover and time.
✗
Question 55. How do internal and external investigations relate?
Your Answer: (Not answered)
Correct Answer: B (internal investigation aims at improvement and cannot replace or obstruct external ones)
💡 Internal investigation serves improvement and preserves evidence; it cannot replace or interfere with official proceedings.
✗
Question 56. The role of periodic medical examination for crew is?
Your Answer: (Not answered)
Correct Answer: B (detect occupational disease early and confirm fitness for duty)
💡 Regular medicals detect hearing, respiratory and cardiovascular problems early and confirm fitness for sea service.
✗
Question 57. Alternatives when ship-shore communication is lost are?
Your Answer: (Not answered)
Correct Answer: D (use backup satellite, MF/HF or relay through another ship or coast station)
💡 Fall back to backup satellite or MF/HF, or relay via other ships and coast stations so contact is never lost.
✗
Question 58. What does considering an emergency exit in the berthing plan mean?
Your Answer: (Not answered)
Correct Answer: C (pre-planning withdrawal routes and measures for loss of control or sudden events)
💡 Every berthing plan needs a pre-planned exit with tug and engine coordination so there is a way out if control is lost.
✗
Question 59. What determines the order of letting go mooring lines when unberthing?
Your Answer: (Not answered)
Correct Answer: B (tug arrangement, wind and current and the load on each line)
💡 The sequence follows tug layout, wind, current and loads: slack lines first, control lines retained, so the ship does not swing out uncontrolled.
✗
Question 60. With pirate skiffs approaching fast, which action is NOT appropriate?
Your Answer: (Not answered)
Correct Answer: A (slow down so they can board while improving steering)
💡 Evade at speed, sound the alarm, alert SSAS and shore, and use protective measures; slowing surrenders the advantage.
✗
Question 61. The concept of residual risk is?
Your Answer: (Not answered)
Correct Answer: D (the risk that remains after controls are applied)
💡 Residual risk remains after controls; judge acceptability and brief those exposed so nobody assumes zero risk.
✗
Question 62. The minimum frequency for ship security training and drills is?
Your Answer: (Not answered)
Correct Answer: B (at least every three months, plus additional drills when circumstances change)
💡 ISPS requires drills at least quarterly, more when circumstances warrant, covering varied threat scenarios.
✗
Question 63. What are the key measures against static electricity while a tanker is loading?
Your Answer: (Not answered)
Correct Answer: A (bonding the shore connection, keeping initial rate low, avoiding splash filling and seldom opening the gauging hatches)
💡 Charge is generated by rate, by splash, by filtering and by what the oil carries, and the defences are to make less of it and to carry off what is made: the line rate held low until the submerged outlets and the circulation are confirmed, the bonding across the shore connection kept effective, the gauging and observation openings left shut during loading with sounding and sampling done after the settling time the procedure gives, no splash filling and no wiping or sweeping with synthetic cloth while oil is running. The old wrong answers, opening every port and pushing the rate up to finish early, add to the hazard, and warming the cargo to thin it has nothing to do with static. Non-certified electrical gear and tools have no place in the zone either.
✗
Question 64. Requirements for drawings and technical data on board are?
Your Answer: (Not answered)
Correct Answer: B (valid editions, complete, accessible and matching the actual ship)
💡 Drawings must reflect the ship after modifications, be current and accessible; wrong ones mislead in emergencies.
✗
Question 65. Requirements for periodic testing of the emergency generator are?
Your Answer: (Not answered)
Correct Answer: A (start and load test regularly and confirm automatic changeover)
💡 Start and load it periodically, verifying auto-start and changeover, and rehearse blackout scenarios.
✗
Question 66. What conditions apply to paralleling generators?
Your Answer: (Not answered)
Correct Answer: B (voltage, frequency and phase must match before paralleling)
💡 Match voltage, frequency and phase or heavy circulating current damages machines and may black out the ship.
✗
Question 67. Which factors must a safe speed take into account?
Your Answer: (Not answered)
Correct Answer: A (visibility, traffic density, manoeuvrability, draught and stopping distance)
💡 Safe speed weighs visibility, traffic, handling including stopping distance, draught, sea state and lights.
✗
Question 68. Regarding Traffic Separation Schemes in voyage planning, one must especially?
Your Answer: (Not answered)
Correct Answer: D (follow direction, avoid crossing zone, use recommended route)
💡 Mark TSS entry/exit, avoid crossing separation zones, and watch junction traffic.
✗
Question 69. The Company may delegate tasks, but it cannot delegate?
Your Answer: (Not answered)
Correct Answer: A (its ultimate responsibility for safety and pollution prevention)
💡 Duties may be delegated, but ultimate accountability stays with the Company.
✗
Question 70. A solution to data silos created by digitalisation is?
Your Answer: (Not answered)
Correct Answer: A (unify data standards and interfaces with central governance ensuring flow between systems)
💡 Harmonise coding and interfaces with master data so maintenance, audit, training and incident data interlink.
✗
Question 71. The usual interval of a special survey is?
Your Answer: (Not answered)
Correct Answer: B (every five years)
💡 The special (renewal) survey occurs every five years with thorough examination including gauging.
✗
Question 72. How are external documents (regulations, circulars) incorporated into the SMS?
Your Answer: (Not answered)
Correct Answer: D (identify applicability, update controlled list, brief and revise internal docs)
💡 Track new rules, assess applicability, update the list, brief staff and revise internal procedures.
✗
Question 73. A persistent list of unknown cause develops after loading. What should you do?
Your Answer: (Not answered)
Correct Answer: B (stop operations, check ballast and stowage, recompute stability and report)
💡 An unexplained list may mean asymmetric ballast, cargo shift or flooding; investigate before blind correction.
✗
Question 74. The purpose of parallel indexing is?
Your Answer: (Not answered)
Correct Answer: A (continuously detect deviation from the planned track early)
💡 Comparing radar returns to fixed reference lines reveals any off-track drift continuously.
✗
Question 75. Asked to continue with insufficient crew, the master should?
Your Answer: (Not answered)
Correct Answer: C (refuse and report the company to meet the minimum safe manning)
💡 Below minimum manning is a serious breach and unseaworthy; refuse, report and sail only once properly manned.
✗
Question 76. On finding a suspicious person boarding or in a restricted area, the ship should?
Your Answer: (Not answered)
Correct Answer: A (per SSP intercept, question, alarm and report to CSO/authority)
💡 Handling suspects is the first security response—follow SSP, report up.
✗
Question 77. What should the SMS do before statutory certificates expire?
Your Answer: (Not answered)
Correct Answer: A (maintain an expiry register and schedule surveys early to avoid gaps)
💡 The SMS keeps an expiry register and books surveys early so certificates never lapse.
✗
Question 78. Before bunkering, ship and shore should confirm?
Your Answer: (Not answered)
Correct Answer: D (grade, quantity, lines/valves, pump sequence, ESD, spill plan)
💡 Confirm grade, quantity, line-up, pump sequence, ESD and spill response before bunkering.
✗
Question 79. After exercising overriding authority, the master should?
Your Answer: (Not answered)
Correct Answer: D (report to the company with reasons and keep records)
💡 Report the decision and reasoning promptly with records so shore can support and the SMS can learn.
✗
Question 80. The basis for judging substantial corrosion in a gauging report is?
Your Answer: (Not answered)
Correct Answer: A (wastage percentage against original thickness beyond the allowed limit)
💡 It is the percentage loss against original thickness versus allowable limits; excessive items must be renewed.
✗
Question 81. How should the master follow up on deficiencies from the last port?
Your Answer: (Not answered)
Correct Answer: B (keep a list, rectify by deadline and verify closure)
💡 Track deficiencies with deadlines and verified closure so repeats at the next port are not read as system failure.
✗
Question 82. How are key operations identified?
Your Answer: (Not answered)
Correct Answer: B (by the consequence if it fails such as injury, pollution or damage)
💡 Judge by consequences: if failure could injure, pollute or cause major loss, manage it by procedure.
✗
Question 83. A pre-arrival briefing should include?
Your Answer: (Not answered)
Correct Answer: C (plan, duties, risk points and abort criteria)
💡 Cover the plan, roles, known risks such as tide and traffic, and the conditions for aborting or diverting.
✗
Question 84. The correct use of the echo sounder in shallow water is?
Your Answer: (Not answered)
Correct Answer: B (combine with tide and draught for under-keel clearance and set a shallow alarm)
💡 Combine sounding with tide, draught and squat to compute clearance and set alarms; never rely on one reading.
✗
Question 85. The difference between an observation and a PSC deficiency in tanker vetting?
Your Answer: (Not answered)
Correct Answer: A (observations suggest improvement; PSC deficiencies carry statutory enforcement)
💡 Vetting observations are advisory from charterers; PSC deficiencies are legally enforceable with deadlines.
✗
Question 86. How does a SART operate?
Your Answer: (Not answered)
Correct Answer: C (replies to radar interrogation showing as a line of blips)
💡 Triggered by a 9 GHz radar it replies, appearing as evenly spaced blips marking the survivor position.
✗
Question 87. What must a system add for ships using alternative fuels?
Your Answer: (Not answered)
Correct Answer: D (procedures and training on fuel properties, leakage and toxicity risks)
💡 Methanol, ammonia and LNG differ greatly; add operating procedures, risk control and emergency training rather than reusing fuel oil practice.
✗
Question 88. What is the first step required by the system after a cyber incident?
Your Answer: (Not answered)
Correct Answer: D (report, isolate and preserve evidence with logs under the plan)
💡 Report up the chain, isolate affected systems and preserve logs for tracing; never delete evidence.
✗
Question 89. What is the key to preparing claim documents?
Your Answer: (Not answered)
Correct Answer: C (complete, true, chronologically consistent and mutually corroborating)
💡 Claim papers must be true, complete and consistent in time, corroborating each other; gaps or contradictions weaken the claim.
✗
Question 90. The correct approach under laytime pressure is?
Your Answer: (Not answered)
Correct Answer: A (cooperate within safe limits without sacrificing safe operations for schedule)
💡 Never breach safety for schedule; log non-ship causes of delay to protect the vessel's position.
✗
Question 91. Which is NOT covered by ship air emission control?
Your Answer: (Not answered)
Correct Answer: C (landfill of crew domestic waste)
💡 Annex VI covers SOx, NOx, particulates, ozone-depleting substances, VOCs and GHG; waste landfilling is Annex V.
✗
Question 92. Requirements for Emergency Escape Breathing Devices (EEBD) are?
Your Answer: (Not answered)
Correct Answer: C (positioned to requirement, inspected and crews trained to don and escape)
💡 Place as required, keep serviceable and train quick donning for escape through smoke, not for firefighting entry.
✗
Question 93. A common cause of position offset on ECDIS is?
Your Answer: (Not answered)
Correct Answer: B (chart datum mismatch or missing antenna offset reference)
💡 Usually datum mismatch between chart and GNSS or an unconfigured antenna offset; verify both routinely.
✗
Question 94. What does the passage plan have to take on before ice?
Your Answer: (Not answered)
Correct Answer: A (arrangements for handling and lookout in ice, protection against freezing, clearing ice from deck, and a plan of refuge)
💡 What the plan takes on for ice: how far the ship's ice class and structure let her go into the ice, where the ice report and the forecast come from, the limits on speed and steering (a ship cannot be handled in ice as in open water), how lookout and the uncertainty of position are managed, protection against freezing of cooling water lines and deck piping, non-slip and ice clearing on deck, what fire and life-saving gear does at low temperature, the behaviour of fuel and lubricating oil in cold, the way out if heavy ice is met and where to take refuge, and the contact with icebreaker or escort. None of this is recovered by improvising on the spot, and every line needs both a man who can do it and the gear to do it with.
✗
Question 95. The inspection focus for the emergency fire pump and fire main is?
Your Answer: (Not answered)
Correct Answer: B (reliable starting, adequate pressure, sound piping and hydrants)
💡 Start it to confirm pressure, check pipes, valves and hydrants, verify isolation valves and record the test.
✗
Question 96. How does the master motivate crew to follow the system?
Your Answer: (Not answered)
Correct Answer: A (explain why, recognise correct behaviour and provide support)
💡 Explaining why and recognising right behaviour builds willing compliance far better than punishment alone.
✗
Question 97. SMS control of external persons (repairers, surveyors) on board should?
Your Answer: (Not answered)
Correct Answer: B (brief risks, require compliance, supervise and register)
💡 External workers must be briefed, made to comply, supervised and logged on board.
✗
Question 98. The precondition for digital tools improving the SMS is?
Your Answer: (Not answered)
Correct Answer: B (clarify and standardise the process first, else you digitise chaos)
💡 Digitising a messy process spreads the mess; fix the process and data definitions first, then automate.
✗
Question 99. What is special about work on high voltage equipment?
Your Answer: (Not answered)
Correct Answer: C (specialist training and authorisation, dedicated tools and a permit-to-work)
💡 High voltage carries arc-flash risk; only authorised staff with dedicated tools and permits may work on it.
✗
Question 100. The significance of document approval is?
Your Answer: (Not answered)
Correct Answer: D (establish responsibility and validity, ensuring content is reviewed before issue)
💡 Approval confirms review and acceptance by authorised persons, underpinning version validity and accountability.