Exam Home Website
中文 English
0
/100
FAIL
Correct: 0/100 Total Questions: 100 Time Spent: 60min0sec
Passing: 80
Retake History
Answer Review
✗
Question 1. The radar and ARPA are found without the required periodic performance tests and records. The finding is?
Your Answer: (Not answered)
Correct Answer: A (Radar and ARPA should be tested and recorded periodically; failure is a navigational equipment management deficiency)
💡 Radar and ARPA are key equipment for collision avoidance and positioning and should undergo periodic performance tests, such as display, range, gain, and ARPA acquisition and tracking, with records kept, to confirm they are in good working order. Without testing or records their reliability cannot be shown. It is a deficiency to be corrected.
✗
Question 2. What is required on completion of a job?
Your Answer: (Not answered)
Correct Answer: B (Clear the site, restore equipment and guards, close the permit and keep records)
💡 On completion of a job the site should be cleared of oil, debris and tools, the guards and safety devices removed for access restored, such as rails, gratings and covers, the permit closed and the persons and tools accounted for, with the completion recorded, preventing hazards from being left behind.
✗
Question 3. How should a non-conformity in the safety management system be handled?
Your Answer: (Not answered)
Correct Answer: B (It must be reported, investigated for root cause and corrected to prevent recurrence)
💡 ISM Code 6 requires non-conformities, accidents and hazardous occurrences to be reported, investigated and analysed for cause, with corrective action to prevent recurrence. Recording alone or blaming an individual is not sufficient.
✗
Question 4. What is required when anchoring in restricted visibility?
Your Answer: (Not answered)
Correct Answer: A (Choose a position after confirming suitable depth and bottom and the absence of dangers nearby, keeping radar and visual monitoring afterwards)
💡 If anchoring becomes necessary in poor visibility, the depth and nature of the bottom and the surrounding area should first be confirmed. After anchoring, radar and visual watch should be maintained, dragging monitored, the anchor lights and shapes displayed and engines kept ready.
✗
Question 5. A door in an escape route is found locked. What should be done?
Your Answer: (Not answered)
Correct Answer: C (Unlock it at once; doors in escape routes must be openable from inside without a key)
💡 A locked door in an escape route prevents evacuation in an emergency. SOLAS requires such doors to be openable from inside without a key. Security concerns should be met by other means such as an alarm, not by obstructing escape.
✗
Question 6. How should suggestions from the crew be adopted and fed back?
Your Answer: (Not answered)
Correct Answer: B (Reasonable suggestions should be adopted and the outcome fed back to the person who raised them, encouraging participation)
💡 The ISM system encourages the crew to take part in safety management. Reasonable suggestions should be assessed and adopted, with the outcome communicated to the person who raised them, so that the crew sees the value of participating and a virtuous circle of finding and improving develops.
✗
Question 7. From what tonnage shall speed and distance measuring equipment be fitted?
Your Answer: (Not answered)
Correct Answer: B (500 GT)
💡 500 GT and above.
✗
Question 8. What must a company do after a non-conformity is found in an internal or external audit?
Your Answer: (Not answered)
Correct Answer: C (Analyse the root cause, take corrective action within the prescribed period and verify its effectiveness)
💡 The ISM Code requires non-conformities found at audit to be analysed for root cause, with corrective action taken and completed within the prescribed period and its effectiveness verified, preventing recurrence.
✗
Question 9. What do SOLAS and good practice address regarding life-saving appliances during temporary repairs?
Your Answer: (Not answered)
Correct Answer: D (Life-saving appliances must remain available; if affected, compensating measures must be taken and accepted by the Administration)
💡 If life-saving appliances must be temporarily removed or are affected during repairs, compensating measures such as adjusting the arrangement, limiting the number of persons or restricting the area of work must be taken and accepted by the Administration or the classification society. The ship must not sail with the deficiency unaddressed.
✗
Question 10. Where must the closing devices of main machinery space ventilation openings be operable?
Your Answer: (Not answered)
Correct Answer: A (From a readily accessible position outside the machinery space, clearly marked)
💡 SOLAS requires the closing devices of the main inlets and outlets of machinery space ventilation to be operable from a readily accessible position outside the machinery space, clearly marked, so that ventilation can be shut off in a fire without entering the space.
✗
Question 11. After a ship is detained by PSC, what is the correct course of action?
Your Answer: (Not answered)
Correct Answer: D (Rectify the deficiencies before departure and apply for a re-inspection, fulfilling the duty to report to the flag State, the recognised organisation and the company)
💡 A detained ship should rectify the deficiencies before departure, or within the permitted period, apply for a port State re-inspection and be confirmed before leaving, and report to the flag State, recognised organisation and company as required with the rectification plan. Sailing without rectification aggravates the consequences and affects the future PSC record.
✗
Question 12. What is the general requirement of SOLAS Chapter II-1 for machinery and electrical installations?
Your Answer: (Not answered)
Correct Answer: C (They shall ensure the safety of the ship under normal and emergency conditions)
💡 They shall ensure the ship's safety under both normal and emergency conditions.
✗
Question 13. When a pilot is on board, how is responsibility allocated?
Your Answer: (Not answered)
Correct Answer: A (The pilot provides pilotage and advice but does not relieve the master of responsibility for the safety of the ship)
💡 A pilot on board provides local pilotage and manoeuvring advice but does not relieve the master of responsibility for the safety of the ship. The master and officer of the watch should still monitor the ship's movement and, if the pilot's orders are likely to cause danger, should speak up promptly and take necessary action.
✗
Question 14. What is required in managing certificates of competence?
Your Answer: (Not answered)
Correct Answer: A (Ensure they are valid and appropriate to the position held and produce them for port State inspection as required)
💡 The certificates of competence, training certificates and medical certificates of the crew should be kept valid and appropriate to the positions held, kept safely on board and produced at inspection. Expired certificates or a mismatch with the position held is a serious deficiency and may lead to the ship being detained or the crew member being required to be replaced.
✗
Question 15. What does SOLAS Chapter IX apply to?
Your Answer: (Not answered)
Correct Answer: C (Passenger ships and cargo ships of 500 GT and above, among others)
💡 Passenger ships and cargo ships of 500 GT and above, among others.
✗
Question 16. How often shall the Company carry out internal audits of the SMS?
Your Answer: (Not answered)
Correct Answer: A (At least once a year)
💡 At least once a year.
✗
Question 17. What preparation and actions does SOLAS require in an abandon ship drill?
Your Answer: (Not answered)
Correct Answer: C (Donning lifejackets, mustering and reporting, preparing and operating the launching gear on orders and starting the boat engine)
💡 SOLAS requires an abandon ship drill to include mustering and reporting, the correct donning of lifejackets, preparing and operating the launching appliances on orders and starting the boat engine, so that each crew member knows his task on abandonment.
✗
Question 18. What shall the master do on encountering dangerous ice or derelicts?
Your Answer: (Not answered)
Correct Answer: B (Communicate the danger immediately to ships in the vicinity and to the competent authority ashore)
💡 SOLAS V/31: the master shall communicate the danger immediately to nearby ships and to the competent authority.
✗
Question 19. What are the main items checked when an inflatable liferaft is serviced?
Your Answer: (Not answered)
Correct Answer: B (Tightness of the raft, the inflation system, the equipment, the weak link and the hydrostatic release unit)
💡 Servicing an inflatable liferaft covers a tightness test, the inflation system including cylinder pressure and valves, the completeness and expiry of the equipment and the condition of the weak link and hydrostatic release unit. Failure of any of these would affect use after abandonment.
✗
Question 20. What does SOLAS V and STCW require regarding the arrangement of navigational watches?
Your Answer: (Not answered)
Correct Answer: B (Watch arrangements must ensure that personnel are not impaired by fatigue in carrying out their duties)
💡 SOLAS V/34 and STCW require watch schedules that prevent fatigue from impairing the performance of duties, with prescribed minimum rest hours. Fatigue management is continuous, not a night-time concern only.
✗
Question 21. What does SOLAS address regarding strainers on bilge suctions?
Your Answer: (Not answered)
Correct Answer: A (Strainers must be fitted and readily removable for cleaning, preventing blockage and loss of drainage capacity)
💡 SOLAS requires bilge suctions to be fitted with strainers readily removable for cleaning, preventing debris from blocking them and reducing drainage capacity. Welded-in strainers or ones never cleaned cause the drainage to fail, a common deficiency.
✗
Question 22. Why must fire nozzles be of the water-fog and jet dual-purpose type?
Your Answer: (Not answered)
Correct Answer: B (spray suiting oil and electrical fires and covering the approach, the jet reaching a distance and cooling the plating)
💡 One nozzle has to serve fires of quite different kinds. On a surface of burning oil, spray covers the fire, holds off the radiation and cools the compartment, whereas a solid jet breaks the oil about and spreads the fire with it; on electrical equipment and in live spaces spray is what may be used, and then only from the distance the practice allows. A water curtain also covers the party as they close on the seat of the fire. Yet to strike from a distance, or to cool a bulkhead or a cargo surface, a solid column is wanted, which is why the nozzle changes between the two without being swapped. Sparing fresh water and ease of carrying are not the point, and calling the jet a spare misreads what the fire demands.
✗
Question 23. A portable gas detector is found beyond its calibration validity. The finding is?
Your Answer: (Not answered)
Correct Answer: C (An uncalibrated detector gives untrustworthy readings, a deficiency affecting enclosed space safety)
💡 A portable gas detector is essential for judging whether the atmosphere is safe before entering an enclosed space or carrying out hot work. Beyond its calibration validity its readings cannot be trusted and may lead to a wrong judgement that endangers personnel. It is a deficiency to be corrected.
✗
Question 24. What is the purpose of heading repeaters for the gyro compass?
Your Answer: (Not answered)
Correct Answer: B (To repeat the heading at positions where it is needed, such as the steering and emergency steering positions)
💡 SOLAS requires heading repeaters at the main steering and emergency steering positions so that the helmsman can read the heading without leaving his station, ensuring accurate steering.
✗
Question 25. What does the management element of a SIRE inspection normally cover?
Your Answer: (Not answered)
Correct Answer: D (Crew qualifications and training records, hours of work and rest and the conduct of safety meetings and training)
💡 The management element of a SIRE inspection normally covers the qualifications and certificates of competence of the crew, training and familiarisation records, records of hours of work and rest for fatigue management and the actual conduct of safety meetings and training, together with the crew's grasp of their own duties.
✗
Question 26. What length of fire hose does SOLAS II-2/10.2.3 require inside machinery spaces?
Your Answer: (Not answered)
Correct Answer: B (Not more than 15 m)
💡 SOLAS II-2/10.2.3 limits fire hoses in machinery spaces to 15 m; 20 m applies to other spaces and open decks. The two limits are frequently confused.
✗
Question 27. What does 'Administration' mean in SOLAS?
Your Answer: (Not answered)
Correct Answer: A (The Government of the State whose flag the ship is entitled to fly)
💡 It means the Government of the flag State.
✗
Question 28. A PSC inspection found the AIS switched off throughout the voyage. On what basis is this a deficiency?
Your Answer: (Not answered)
Correct Answer: C (AIS must remain in operation and may be switched off only where the master considers this necessary for safety or security)
💡 SOLAS V/19.2.10 requires AIS to remain in operation. It may be switched off only where the master believes its operation might compromise safety or security, with the reason and period recorded in the log. Leaving it off without justification is a deficiency.
✗
Question 29. What is required when new piping is passed through a fire division during a conversion?
Your Answer: (Not answered)
Correct Answer: D (Execute the approved penetration sealing arrangement, updating the fire control plan and records)
💡 New penetrations of a fire division require the approved penetration sealing arrangement to be used, with approved seals of equivalent fire rating, while the fire control plan and records are updated and the work verified by the classification society. A plain hole or cement sealing destroys the fire integrity of the division.
✗
Question 30. What is the main purpose of thickness measurement in the enhanced survey?
Your Answer: (Not answered)
Correct Answer: B (To assess corrosion and remaining structural strength)
💡 Thickness measurement quantifies plate loss and the remaining strength of the structure.
✗
Question 31. What measures prevent persons falling overboard?
Your Answer: (Not answered)
Correct Answer: C (Guard rails and lifelines, non-slip and well drained decks, good lighting and avoiding unnecessary deck work in heavy weather)
💡 Preventing a person from going overboard requires measures in combination: guard rails and lifelines at the sides, decks kept non-slip and well drained, lighting improved at night and in heavy weather, unnecessary deck work avoided and lifejackets and harnesses worn as required, reducing the risk.
✗
Question 32. What is the role of the responsible person in the enclosed space entry permit system?
Your Answer: (Not answered)
Correct Answer: D (The master or a designated person reviews the test results and issues the permit, specifying the conditions of entry and the standby arrangements)
💡 SOLAS and the IMO resolutions require the master or a designated person to review the gas test results, confirm ventilation and standby arrangements and then issue the entry permit specifying the conditions. Self-assessment or issue by an unauthorised person does not comply.
✗
Question 33. What are the key points in using a portable extinguisher?
Your Answer: (Not answered)
Correct Answer: D (Pull the pin, aim the nozzle at the base of the fire and sweep while pressing the lever)
💡 Using a portable extinguisher involves pulling the pin, holding the nozzle and aiming at the base of the fire, that is the burning surface, then sweeping while pressing the lever. Aiming at the top of the flames is ineffective, and the position should allow a line of retreat.
✗
Question 34. What accuracy requirement applies to electronic position fixing systems?
Your Answer: (Not answered)
Correct Answer: A (They must provide the accuracy needed for safe navigation and give an indication when accuracy degrades)
💡 SOLAS requires electronic position fixing systems to provide the accuracy needed for safe navigation and to warn the user when accuracy degrades, such as a GPS integrity alarm, so the officer can switch to other means.
✗
Question 35. What does SOLAS address regarding product certification of life-saving appliances?
Your Answer: (Not answered)
Correct Answer: C (Appliances must hold type approval or product certificates from a recognised body attesting compliance with the performance standards)
💡 SOLAS requires life-saving appliances to comply with the performance standards such as the LSA Code and to hold type approval or product certificates. Approval marks and certificates are checked at survey and PSC, and equipment without an approval mark may not be accepted.
✗
Question 36. A survey is carried out two months early. What is the effect under SOLAS?
Your Answer: (Not answered)
Correct Answer: C (The next due date is still counted from the original anniversary, not postponed by the early survey)
💡 The SOLAS window allows flexibility in scheduling but does not change the due date, which is counted from the certificate anniversary. An early survey does not postpone the next one, preventing effective extension of the certificate by surveying early.
✗
Question 37. The emergency fire pump needs manual priming before it will draw water. What does SOLAS address?
Your Answer: (Not answered)
Correct Answer: B (A deficiency; the emergency fire pump must draw water by itself, and manual priming would delay emergency use)
💡 SOLAS requires the emergency fire pump to be self-priming, or to have a priming arrangement meeting the requirements, so that it draws water without manual priming in an emergency. Needing manual priming would delay the water supply when it matters and is a deficiency.
✗
Question 38. What does the Polar Code require regarding life-saving appliances in polar waters?
Your Answer: (Not answered)
Correct Answer: C (They must work at low temperature, with measures to extend survival time in the polar environment)
💡 The Polar Code requires life-saving appliances to function at low temperature and for measures to extend survival time, such as additional thermal protection, collective survival equipment and search aids.
✗
Question 39. What does SOLAS II-2 require for paint lockers and flammable liquid lockers?
Your Answer: (Not answered)
Correct Answer: C (A suitable fire-extinguishing arrangement, such as a fixed system or equivalent)
💡 SOLAS II-2/15 requires paint and flammable liquid lockers to be provided with a suitable extinguishing arrangement because of the high fire load and rapid spread in such spaces.
✗
Question 40. Under what conditions shall a lifeboat engine be able to start?
Your Answer: (Not answered)
Correct Answer: B (Even at the specified low temperature)
💡 It shall start even at the specified low temperature.
✗
Question 41. What does SOLAS require for the use of the echo sounder in shoal water?
Your Answer: (Not answered)
Correct Answer: A (It must give a continuous depth reading and be capable of an alarm at a preset safety depth)
💡 SOLAS requires the echo sounder to provide a continuous depth reading and to be capable of an alarm at a preset safety depth, enabling the officer to detect approaching shoal water in good time. A hand lead is not a substitute.
✗
Question 42. For how long at least should the backup power of an ECDIS keep it working?
Your Answer: (Not answered)
Correct Answer: B (At least thirty minutes)
💡 Under SOLAS V/19.2.6 an ECDIS should have a backup power supply able to keep it working for at least thirty minutes if the main or emergency source fails, so that essential navigational information is not interrupted. The condition of the backup supply such as a UPS should be included in checks and maintenance.
✗
Question 43. SOLAS Chapter XII mainly applies to which type of ship?
Your Answer: (Not answered)
Correct Answer: D (Bulk carriers)
💡 Bulk carriers.
✗
Question 44. What is the general requirement for the location of embarkation stations?
Your Answer: (Not answered)
Correct Answer: A (Where persons can board safely, as far as practicable from the propulsion plant and dangerous goods)
💡 SOLAS requires embarkation stations to be located where persons can board safely, taking account of the need to be clear of propellers, thrusters, exhausts and dangerous goods, so that persons are not injured while boarding and the operation is possible even if the ship still has headway.
✗
Question 45. From what gross tonnage must ships carry AIS?
Your Answer: (Not answered)
Correct Answer: B (300 GT)
💡 SOLAS V/19: AIS is required for ships of 300 GT and above on international voyages.
✗
Question 46. In severe weather, what measures may be taken to reduce cargo shifting and hull stress?
Your Answer: (Not answered)
Correct Answer: C (Adjust course and speed to ease rolling and slamming, check cargo securing and alter course to shelter if necessary)
💡 In severe weather the course and speed may be adjusted to ease rolling, pitching and slamming, cargo and deck fittings' securing checked and reinforced, the course altered flexibly to seek shelter, and stability and hull stress closely monitored. Driving fast through severe conditions worsens hull stress and cargo shifting.
✗
Question 47. Besides the ship, where else shall life-saving appliances be provided?
Your Answer: (Not answered)
Correct Answer: A (One full set at the shore establishment)
💡 A full set shall also be kept at the shore establishment.
✗
Question 48. The steering gear suddenly loses power while running. What alarm does SOLAS II-1/29 require?
Your Answer: (Not answered)
Correct Answer: D (An audible and visual alarm on the bridge on failure of the steering gear power unit)
💡 SOLAS II-1/29 requires an audible and visual alarm on the bridge when a steering gear power unit fails, so that the officer can immediately take emergency steering action.
✗
Question 49. What should the radio personnel do when the abandon ship alarm is sounded?
Your Answer: (Not answered)
Correct Answer: D (Ensure a distress alert has been transmitted and maintain communication, taking portable radio equipment into the survival craft)
💡 On the abandon ship alarm, the personnel responsible for radio should ensure a distress alert has been sent with the position and nature of distress, attempt to establish communication and take the portable VHF and, where applicable, the EPIRB into the survival craft as prescribed, so that distress communication continues after abandonment.
✗
Question 50. What is the purpose of isolating valves in the fire main?
Your Answer: (Not answered)
Correct Answer: B (Isolating the damaged section while maintaining supply elsewhere)
💡 They isolate a damaged section while the rest of the main remains in service.
✗
Question 51. The carriage of dangerous chemicals in bulk shall follow:
Your Answer: (Not answered)
Correct Answer: B (the International Bulk Chemical Code (IBC Code))
💡 SOLAS VII/7: the carriage of dangerous chemicals in bulk shall follow the IBC Code.
✗
Question 52. When navigating in polar waters, what should be paid particular attention to under the Polar Code?
Your Answer: (Not answered)
Correct Answer: A (The effects of low temperature on equipment and personnel, ice conditions and ice class, and the procedures and limitations in the Polar Ship's Operational Manual)
💡 The polar environment is special, so particular attention should be paid to the effects of low temperature on equipment such as life-saving appliances, firefighting, fuel and hydraulic systems and on personnel, to ice conditions and the ship's ice class limits, and to the operational procedures and limitations in the Polar Ship's Operational Manual, with specific training and preparation carried out.
✗
Question 53. A Ship Security Alert System (SSAS) is intended to:
Your Answer: (Not answered)
Correct Answer: B (transmit a security alert to the competent authority indicating the ship's identity and position)
💡 SOLAS XI-2/6: a Ship Security Alert System transmits a security alert, indicating the ship's identity and position, to the competent authority.
✗
Question 54. Which statement about the accounting for persons and boarding sequence during abandonment is correct?
Your Answer: (Not answered)
Correct Answer: D (All persons on board should be accounted for under the muster list and boarding carried out in order, giving priority to the injured and those with reduced mobility)
💡 During abandonment the persons on board, including watchkeepers and visitors, should be accounted for under the muster list and organised to board the survival craft in order, giving priority to the injured and those with reduced mobility, taking the required equipment, communication sets and necessary items. Abandoning without accounting leads to persons being left behind.
✗
Question 55. What are the approval and use requirements for the Cargo Securing Manual?
Your Answer: (Not answered)
Correct Answer: C (It should be approved by the Administration and carried on board, the crew securing cargo and inspecting the securing equipment as it requires)
💡 Under SOLAS V/5 and related requirements the relevant ships should carry a Cargo Securing Manual approved by the Administration, containing the list, strength, arrangement and use of the securing devices, the crew securing cargo as it requires and inspecting and maintaining the equipment at the required intervals, recording defects and repairs.
✗
Question 56. What does SOLAS address regarding the arrangement of fuel oil tanks?
Your Answer: (Not answered)
Correct Answer: C (They must be arranged to avoid proximity to or being above high temperature areas, reducing the risk of leaking oil contacting a source of heat)
💡 SOLAS requires fuel oil tanks to be arranged away from high temperature areas or from being above them, reducing the risk of leaking oil contacting hot surfaces or falling into hot zones of the machinery space, preventing fire.
✗
Question 57. How shall cargo units be loaded and secured?
Your Answer: (Not answered)
Correct Answer: B (So as to withstand the forces expected during the voyage without shifting)
💡 So as to withstand expected forces without shifting.
✗
Question 58. An ECDIS is found using non-official electronic charts instead of official ENCs. The finding is?
Your Answer: (Not answered)
Correct Answer: B (Using non-official charts affects navigational safety, a navigational safety deficiency to be corrected)
💡 An ECDIS should use electronic navigational charts issued by an official hydrographic office, or approved equivalent data, to ensure that navigational information is accurate and official. Using non-official charts may lead to inaccurate information endangering navigational safety. It is a deficiency to be corrected.
✗
Question 59. What is required in controlling trim during loading?
Your Answer: (Not answered)
Correct Answer: A (Maintain an appropriate stern trim or even keel, avoiding excessive trim affecting manoeuvrability, speed and structural stress)
💡 A moderate stern trim favours propeller efficiency and rudder response, but excessive trim by the stern or by the head reduces forward freeboard or lifts the propeller out, affecting manoeuvrability and speed and increasing structural stress. Trim should be controlled according to the stability and strength information.
✗
Question 60. What certificate must a ship operating in polar waters carry?
Your Answer: (Not answered)
Correct Answer: C (A Polar Ship Certificate)
💡 SOLAS XIV/3 requires ships operating in polar waters to hold a Polar Ship Certificate attesting compliance with the relevant parts of the Polar Code.
✗
Question 61. Which principle applies to the stowage of survival craft?
Your Answer: (Not answered)
Correct Answer: D (They must be readily available and capable of being launched and boarded rapidly and safely in an emergency)
💡 Under SOLAS III/13 survival craft should be stowed in a position where they are readily available and can be launched and boarded rapidly and safely, protected from the effects of fire and explosion, the arrangement of the craft and their launching and boarding appliances ensuring that in an emergency persons can muster, board and clear quickly.
✗
Question 62. Among the information entered into AIS, which is static?
Your Answer: (Not answered)
Correct Answer: B (The IMO number, call sign and ship's name, being fixed particulars of the ship)
💡 AIS static information includes the IMO number, call sign, name and type of ship, entered at installation and rarely changed. Position, course and speed are dynamic; destination and ETA are voyage related.
✗
Question 63. What do the blind sector limitations of SOLAS V/22 principally concern?
Your Answer: (Not answered)
Correct Answer: A (The total arc and individual arcs of blind sectors ahead as seen from the conning position)
💡 SOLAS V/22 limits the number and total arc of blind sectors ahead from the conning position so that the look-out remains effective. It does not deal with radar shadows or window reflection.
✗
Question 64. What must the emergency preparedness procedures contain?
Your Answer: (Not answered)
Correct Answer: A (Identification of the emergencies possible and the alarm and response procedures, duties and external contacts)
💡 The ISM Code requires the emergency preparedness procedures to cover the identification of the emergencies possible, such as fire, flooding, collision, pollution and injury, the alarm and response steps, the duties of each position and shore support and external contacts with search and rescue, the port and the company, with regular drills.
✗
Question 65. At what stage must the initial survey for statutory certificates be completed?
Your Answer: (Not answered)
Correct Answer: A (Before the ship is put into service)
💡 SOLAS I/7 requires the initial survey to be completed and the certificates obtained before the ship is put into service. Operating without them is a serious breach of the Convention.
✗
Question 66. What navigational measures should the officer of the watch take in restricted visibility?
Your Answer: (Not answered)
Correct Answer: D (Engines ready for immediate manoeuvre, enhanced look-out and radar observation, reducing speed as required and using sound signals)
💡 COLREG Rule 19 and good seamanship require engines ready for immediate manoeuvre, an enhanced look-out and radar observation, reduction of speed or stopping where necessary and the prescribed sound signals, so that other vessels are warned in due time.
✗
Question 67. What does SOLAS address regarding life-saving appliances when trading in cold climates?
Your Answer: (Not answered)
Correct Answer: C (The effect of low temperature on equipment performance and on survival must be considered, with insulating and warming provisions)
💡 SOLAS requires ships trading in cold climates to take account of the effect of low temperature on life-saving appliances, such as reduced battery capacity, difficulty in starting engines and changed equipment performance, and on survival, such as the risk of hypothermia, providing immersion suits, thermal protective aids and corresponding emergency supplies.
✗
Question 68. What does SOLAS III require for markings and instructions on life-saving appliances?
Your Answer: (Not answered)
Correct Answer: C (They must be clearly marked in the working language of the ship or in English, with operating illustrations)
💡 SOLAS III requires markings, instructions and operating illustrations to be clearly given in the working language of the ship or in English so that all crew members can understand them.
✗
Question 69. What do SOLAS and the IBC Code address regarding the operation of the inert gas system?
Your Answer: (Not answered)
Correct Answer: D (It must remain in operation with tank pressure and oxygen content monitored during cargo, ballast and tank cleaning operations)
💡 SOLAS and the IBC Code require the inert gas system to remain in operation during cargo handling, ballasting and tank washing, with the oxygen content and pressure of each tank monitored continuously. If limits are exceeded, operations must stop to avoid the risk of explosion.
✗
Question 70. What preparations should a ship make before an annual survey?
Your Answer: (Not answered)
Correct Answer: A (Keep equipment in good order and have records, certificates and survey reports ready so that the survey proceeds smoothly)
💡 Before a survey, equipment should be in working order, records and certificates available, routine maintenance completed and known problems dealt with, avoiding deficiencies, or even an effect on the validity of certificates, from equipment not working or records missing.
✗
Question 71. On what is the safe speed a ship should be carrying at a given moment determined?
Your Answer: (Not answered)
Correct Answer: D (speed settled by visibility, traffic density, manoeuvring performance, wind and sea, draught and background light, so that the ship can stop in the distance appropriate to the conditions)
💡 Rule 6 makes safe speed a capability rather than a figure: ability to stop within the distance appropriate to the conditions and to take effective collision action. Visibility, traffic density, the ship's own stopping distance and turning ability, background lighting by night, wind, sea and rain, draught against the available depth, all count, and engines must be ready in a narrow channel or in fog. A port limit is an extra constraint: keeping under it is not the same as keeping Rule 6, and keeping Rule 6 may call for less than the limit.
✗
Question 72. For the discharge of bilge water treated by an oily water separator, what is the general oil content limit?
Your Answer: (Not answered)
Correct Answer: B (15 parts per million)
💡 Under MARPOL Annex I, bilge water treated by an oily water separator may generally be discharged only if its oil content does not exceed fifteen parts per million, with the 15ppm alarm and automatic stopping device. Tankers are subject to stricter distance and monitoring requirements.
✗
Question 73. What is required for electrical equipment in areas of machinery spaces where flammable gas may accumulate?
Your Answer: (Not answered)
Correct Answer: B (Explosion-protected equipment or effective ventilation with gas detection, preventing ignition by electrical sparks)
💡 In spaces such as purifier rooms and fuel pump rooms where flammable gas may accumulate, explosion-protected equipment or effective ventilation with gas detection is required, preventing an electrical spark from becoming a source of ignition.
✗
Question 74. What arrangements does SOLAS permit to ensure the availability of radio equipment in sea areas A1 and A2?
Your Answer: (Not answered)
Correct Answer: A (Duplication of equipment, a shore-based maintenance agreement, or at-sea maintenance capability — one of the three)
💡 SOLAS IV/15 allows availability to be ensured by duplication of equipment, a shore-based maintenance contract or at-sea maintenance capability, used singly or in combination.
✗
Question 75. What should be noted about launching lifeboats while the ship has headway?
Your Answer: (Not answered)
Correct Answer: A (Reduce speed or stop if possible before launching, avoiding the boat being swept away or striking the hull)
💡 A lifeboat should be launched with speed reduced or the ship stopped where possible, since headway produces a flow that can sweep the boat away or dash it against the hull. If stopping is impossible in an emergency, the boat should be launched on the lee side with due preparation.
✗
Question 76. The deck foam system of a tanker shall be capable of supplying foam over the protected deck area within:
Your Answer: (Not answered)
Correct Answer: A (30 minutes)
💡 SOLAS II-2/20: the deck foam system shall be capable of supplying foam over the protected deck area within 30 minutes.
✗
Question 77. What is the purpose of a bearing device in collision avoidance?
Your Answer: (Not answered)
Correct Answer: A (To take bearings of an approaching vessel and determine whether a risk of collision exists)
💡 A bearing device is used to take repeated bearings of an approaching vessel, an essential means of judging whether a risk of collision exists. It has nothing to do with speed or depth measurement.
✗
Question 78. The fuel provided for a lifeboat engine should normally allow it to run at rated speed for at least how long?
Your Answer: (Not answered)
Correct Answer: D (Twenty-four hours, though other periods may apply according to the maker)
💡 Under SOLAS III/4 and the lifeboat requirements the fuel provided for the lifeboat engine should allow it to run at rated speed for at least twenty-four hours, so that it can clear the casualty, manoeuvre at sea and rendezvous after abandonment. The fuel system and starting arrangement should be kept in good order.
✗
Question 79. What readiness condition must survival craft be in while the ship is at sea?
Your Answer: (Not answered)
Correct Answer: C (They must be ready for immediate use, capable of being launched at any time)
💡 SOLAS requires survival craft and their launching appliances to be kept ready for immediate use throughout the voyage. They may not be dismantled at sea or stowed where they cannot be launched quickly.
✗
Question 80. What should be done with the receiving equipment after a weather warning is received?
Your Answer: (Not answered)
Correct Answer: A (Confirm the message was received complete, retain or print it as required and report important warnings to the bridge promptly)
💡 Weather and navigational warnings received by NAVTEX or EGC should be confirmed as received in full, avoiding loss of information from character errors or interrupted reception, retained or printed as required, with important warnings such as gale or ice warnings reported promptly to the bridge for the conduct of the voyage.
✗
Question 81. What are the stowage and inspection interval requirements for the firefighter's outfits?
Your Answer: (Not answered)
Correct Answer: A (They should be stowed where they are readily available and protected from damage, and inspected for completeness at the required intervals)
💡 Firefighter's outfits should be stowed where they are readily available and protected from heat, damp and damage, and inspected at the required intervals, such as weekly or monthly, for the condition of the protective clothing, helmet, safety lamp, axe and breathing apparatus and for adequate cylinder pressure, with records kept.
✗
Question 82. What does the ISM Code emphasise about the company's responsibility?
Your Answer: (Not answered)
Correct Answer: A (The company has overall responsibility for the safety and pollution prevention management of its ships and must provide resources and support)
💡 The ISM Code emphasises that the company bears overall responsibility for the safety and pollution prevention management of its ships and must provide the necessary resources, personnel, equipment, training and shore support, and must not shift that responsibility to the master or the crew.
✗
Question 83. What does SOLAS XI-2/8 provide regarding the master's authority and responsibility for security?
Your Answer: (Not answered)
Correct Answer: C (The master has ultimate responsibility for the safety and security of the ship and authority to make necessary decisions)
💡 SOLAS XI-2/8 emphasises that the master has ultimate responsibility for the safety and security of the ship and the authority to take necessary decisions, seeking company or port facility assistance as needed, free of constraint by owner or charterer.
✗
Question 84. Besides the capacity requirement, what else must be considered for liferafts under SOLAS?
Your Answer: (Not answered)
Correct Answer: A (They must be able to float free if the ship sinks, fitted with a hydrostatic release unit)
💡 SOLAS requires liferafts to float free if the ship sinks, fitted with a hydrostatic release unit and a weak link. Locking them or stowing them in a hold makes them unavailable on abandonment and is a deficiency.
✗
Question 85. Which systems shall be used to receive navigational warnings?
Your Answer: (Not answered)
Correct Answer: C (Maritime safety information systems such as NAVTEX and SafetyNET)
💡 Systems such as NAVTEX and SafetyNET.
✗
Question 86. What should a maintenance programme for radio equipment include?
Your Answer: (Not answered)
Correct Answer: B (Daily checks, periodic tests, spares provision and repair arrangements, either ashore or on board)
💡 SOLAS requires the availability of radio equipment to be ensured by daily checks, periodic tests, spare parts and either a shore-based maintenance agreement or at-sea maintenance capability, with the maintenance programme reflecting these arrangements and verified at survey.
✗
Question 87. SOLAS requires each ship to be provided with:
Your Answer: (Not answered)
Correct Answer: A (a training manual describing the use of life-saving appliances and survival knowledge)
💡 SOLAS III/35 requires a training manual describing the use of the ship's life-saving appliances and survival knowledge.
✗
Question 88. Where an enclosed means of escape is provided from a category A machinery space, what minimum fire protection does SOLAS II-2/13.4.3 require?
Your Answer: (Not answered)
Correct Answer: C (A-60 class division)
💡 SOLAS II-2/13.4.3 requires the enclosed means of escape from a category A machinery space to be of A-60 standard so that the route remains usable during a machinery space fire.
✗
Question 89. What is the meaning and use of an H class division?
Your Answer: (Not answered)
Correct Answer: A (The highest grade of fire-resisting division in the standard test, used for high risk boundaries such as pump rooms on tankers)
💡 An H class division is the highest grade of fire-resisting division under SOLAS, used for high risk boundaries such as the boundaries of cargo pump rooms on tankers. It exceeds class A performance and must retain structural integrity after the test.
✗
Question 90. What number of thermal protective aids must a lifeboat carry under SOLAS?
Your Answer: (Not answered)
Correct Answer: C (10 per cent of the rated number of persons, and not fewer than two)
💡 SOLAS requires a lifeboat to carry thermal protective aids for 10 per cent of the rated number of persons, and not fewer than two. An insufficient number leaves some persons without thermal protection in cold conditions.
✗
Question 91. What is the principal consideration for the foam concentrate quantity of a tanker deck foam system?
Your Answer: (Not answered)
Correct Answer: C (It must sustain the required period of extinguishing operation and meet the prescribed minimum quantity)
💡 SOLAS requires the foam concentrate on a tanker to sustain continuous extinguishing for the prescribed duration and to meet a specified minimum, ensuring adequate firefighting capability.
✗
Question 92. What is required for the arrangement of two power units of the main steering gear?
Your Answer: (Not answered)
Correct Answer: D (Each must be controllable from the bridge separately, so that steering remains available if one fails)
💡 SOLAS requires the two power units of the main steering gear to be capable of separate control from the bridge or with automatic change-over, so that steering is retained if one fails. A shared control system could fail as one.
✗
Question 93. What is required for monitoring stability during loading and unloading?
Your Answer: (Not answered)
Correct Answer: C (Monitor stability and strength at each stage against the loading plan, preventing excessive hogging or sagging or insufficient initial stability)
💡 SOLAS requires stability and hull strength to be monitored at each stage against the loading plan, preventing excessive hogging or sagging and insufficient initial stability. Calculating only afterwards cannot prevent structural damage during cargo work.
✗
Question 94. What time limits apply to work in an enclosed space?
Your Answer: (Not answered)
Correct Answer: D (Work according to the conditions and period in the permit, with re-testing and a new permit if the period expires or conditions change)
💡 SOLAS and the IMO resolutions require work in an enclosed space to be carried out under the conditions and for the period stated in the permit, with ventilation and testing maintained. If the permit period expires, ventilation is interrupted or conditions change, work must stop, the atmosphere be re-tested and a new permit issued.
✗
Question 95. Under SOLAS I/8, the flag State shall:
Your Answer: (Not answered)
Correct Answer: D (ensure compliance with the Convention and supervise its ships)
💡 SOLAS I/8: the flag State shall ensure compliance with the Convention and supervise its ships.
✗
Question 96. What is the focus of survey for ageing bulk carriers under SOLAS and the ESP?
Your Answer: (Not answered)
Correct Answer: C (The effect on hull strength of corrosion, fatigue cracking and structural deformation)
💡 The ESP and SOLAS require close-up examination of ageing bulk carriers for corrosion, fatigue cracking and deformation, with thickness measurement to assess remaining hull strength and decide on repair or reinforcement.
✗
Question 97. When transiting a high-risk piracy area, which of the following is NOT among the measures recommended by Best Management Practices?
Your Answer: (Not answered)
Correct Answer: C (Switching off AIS and automatic identification to avoid being tracked)
💡 Best Management Practices recommend measures such as increasing speed and freeboard, fitting razor wire and physical barriers, providing and drilling a citadel, strengthening lookout and lighting, and reporting as required and reporting pirate activity. AIS should generally remain on, and switching it off may breach the rules and hinder search and rescue, so it is not a recommended measure.
✗
Question 98. What do SOLAS and good practice address regarding the safe operation of mooring winches?
Your Answer: (Not answered)
Correct Answer: C (Winches must be maintained in good condition and operators trained in the correct procedures)
💡 Mooring winches should be inspected and maintained, and operators trained and familiar with the brake, clutch and emergency release. Incorrect operation can part a line, injure personnel or damage equipment.
✗
Question 99. At what trim shall launching appliances be able to operate?
Your Answer: (Not answered)
Correct Answer: A (10° trim)
💡 At 10 degrees of trim, together with the corresponding list.
✗
Question 100. What must the weekly inspection of life-saving appliances record under SOLAS?
Your Answer: (Not answered)
Correct Answer: B (The availability of the craft and launching appliances, the completeness of equipment and the condition of the boat engines)
💡 SOLAS III/20 requires the weekly inspection to cover the craft, the launching appliances, the completeness of equipment and the condition of the engines, with the details and any defects found entered in the deck log as evidence of the working of the system.