Exam Home Website
中文 English
0
/100
FAIL
Correct: 0/100 Total Questions: 100 Time Spent: 60min0sec
Passing: 80
Retake History
Answer Review
✗
Question 1. When sailing near a high-threat port, security level rises 2 to 3; the ship should?
Your Answer: (Not answered)
Correct Answer: C (immediately apply SSP Level 3 measures, check restricted areas and comms)
💡 Level change must trigger specific SSP extras: patrols, boarding limits, comms.
✗
Question 2. Key deck fire/explosion control during tanker port operations is?
Your Answer: (Not answered)
Correct Answer: A (no-smoking, anti-static, controlled hot work, explosion-proof equipment)
💡 Hydrocarbons accumulate on deck during transfer; ignition control and EX equipment are vital.
✗
Question 3. The ship becomes fouled by fishing nets at sea; what applies?
Your Answer: (Not answered)
Correct Answer: B (stop to assess, report and take measures to clear it, avoiding blind manoeuvring)
💡 Blind manoeuvring worsens fouling and damages shafting; stop, assess, report and clear it safely.
✗
Question 4. The "easy access" principle for shipboard documents is?
Your Answer: (Not answered)
Correct Answer: C (users find the latest version quickly where needed)
💡 Store documents near where they are used; distant safes or electronic-only copies weaken them in emergencies.
✗
Question 5. What condition requires stopping cargo operations?
Your Answer: (Not answered)
Correct Answer: B (unsafe conditions such as lightning, gas above limits or loss of communications)
💡 Lightning, gas over limits, lost communications or equipment faults require stopping work and closing valves at once.
✗
Question 6. Meeting head-on in a narrow channel where both cannot easily keep right; what applies?
Your Answer: (Not answered)
Correct Answer: C (slow early and agree a passing arrangement by sound signals and VHF)
💡 Keep right per the rules, coordinate by VHF and whistle, and slow or let one wait to avoid a close head-on.
✗
Question 7. A cracked bollard is found on board in port; you should?
Your Answer: (Not answered)
Correct Answer: B (take it out of use, report for repair and adjust mooring arrangement)
💡 A cracked bollard may fail under load causing snap-back; stop using, adjust moorings and arrange proper repair.
✗
Question 8. When a pilot is aboard, the master's responsibility is?
Your Answer: (Not answered)
Correct Answer: C (not relieved; the master remains responsible and may take over if needed)
💡 A pilot does not relieve the master, who must supervise and be ready to intervene.
✗
Question 9. Before bunkering, ship and shore should confirm?
Your Answer: (Not answered)
Correct Answer: D (grade, quantity, lines/valves, pump sequence, ESD, spill plan)
💡 Confirm grade, quantity, line-up, pump sequence, ESD and spill response before bunkering.
✗
Question 10. Common forms of corrective action evidence are?
Your Answer: (Not answered)
Correct Answer: B (photographs, records, test reports, training attendance and recheck findings)
💡 Evidence must show actions done and effective: photos, updated records, tests, rechecks and training logs.
✗
Question 11. What does the system require on contracts and wage payment?
Your Answer: (Not answered)
Correct Answer: A (sign lawfully, pay in full and on time and keep signed receipts)
💡 Contracts and wages are inspection priorities: sign properly, pay on time and keep receipts.
✗
Question 12. Finding a crew member carrying prohibited drugs on board, the master should?
Your Answer: (Not answered)
Correct Answer: C (secure evidence, report company and shore and act per SMS and law)
💡 Drugs are serious: secure evidence, inform company and port authorities and act per policy and law with records.
✗
Question 13. The SOPEP should be periodically?
Your Answer: (Not answered)
Correct Answer: D (drilled for reporting and initial response, with equipment checks)
💡 Drills familiarise the crew with reporting and gear, ensuring real-spill effectiveness.
✗
Question 14. When are the oxygen and gas tests made?
Your Answer: (Not answered)
Correct Answer: B (test before entry, repeat at intervals while the work lasts, and record the readings and the times)
💡 Before anyone enters a cargo tank, and before hot work around the hatch, oxygen and combustible gas must be measured: oxygen commonly judged against a working range of 19.5% to 23.5%, gas readings against the percentage of the lower explosive limit, the instrument within its calibration and zeroed outside the tank before use. During the work the tests are repeated at intervals or carried on continuously, because ventilation, the progress of cleaning and the work itself all change the atmosphere. The nose cannot be relied on - some toxic gases stop being detectable at high concentration, and gas below the lower limit gives no warning by smell. Measuring points are taken high, middle and low and at the hatch and around the piping, and every reading, its position and its time are recorded.
✗
Question 15. Ship-shore comms during a security incident should be?
Your Answer: (Not answered)
Correct Answer: C (confidential, concise, on designated channels, preventing leak or misleading)
💡 Leaked security comms endanger hostages and ops; keep controlled.
✗
Question 16. Gauging shows shell plating beyond the allowable corrosion limit; the master should?
Your Answer: (Not answered)
Correct Answer: B (report company and class at once and follow instructions to reduce load or repair)
💡 Corrosion beyond limits affects hull strength; report and follow class instructions on load or repair, never conceal it.
✗
Question 17. Of the two certificates issued under the ISM Code, which goes to the company and which to the ship?
Your Answer: (Not answered)
Correct Answer: B (the document of compliance to the company, the safety management certificate to the ship run under the approved system)
💡 The document of compliance says the company's system for that class of ship meets the Code; the safety management certificate says the named ship is being run under the approved system, tied to the initial, intermediate, renewal and additional audits. A company certificate is no substitute on board, a ship's certificate says nothing about the company, and two ships cannot share one safety management certificate; both are produced on inspection and at port calls.
✗
Question 18. The purpose of Notices to Mariners is to?
Your Answer: (Not answered)
Correct Answer: D (promulgate chart corrections and safety information for updating publications)
💡 Notices give permanent, temporary and preliminary corrections plus hazards, keeping publications current.
✗
Question 19. While the ship is in for repair, who runs safety and pollution prevention?
Your Answer: (Not answered)
Correct Answer: B (the responsibility boundary between company, yard and ship has to be put down in writing)
💡 Repair time is high-risk time: hot work, tank entry, work at height and lifting run together on a ship that may still hold residues, gas and flammables. Before work starts the boundary between yard, ship and company is settled and written into the contract and the work permits - who authorises hot work, who tests the atmosphere and stands the fire watch, who controls extinguishing and alarms, who takes the waste oil, bilge and residue and issues the receipt, how tank entry is permitted. The ship's people join the rounds and the acceptance, and completed work is signed off against standard and test record rather than left to the yard's own quality check. Where the boundary is blurred, all three parties fail to explain the accident afterwards.
✗
Question 20. What is the most common direct cause in electrical accident cases?
Your Answer: (Not answered)
Correct Answer: A (working live in breach of rules and failure to verify isolation)
💡 Most cases stem from live work or unverified isolation; enforcing permits and isolation cuts the risk sharply.
✗
Question 21. The barge supplying fuel lacks proper documentation; you should?
Your Answer: (Not answered)
Correct Answer: D (refuse and require compliant documents before starting)
💡 Without proper papers there is compliance and claim risk; refuse until quantity and quality documents are provided.
✗
Question 22. What is the risk in electronic document management?
Your Answer: (Not answered)
Correct Answer: A (version confusion and unauthorised changes undermining control)
💡 Electronic files need permissions and version control against casual edits and old versions, with retrievable backups.
✗
Question 23. What is the legal status of a pilot on board?
Your Answer: (Not answered)
Correct Answer: A (advises with local knowledge while command and responsibility remain with the master)
💡 A pilot does not transfer responsibility; the master must monitor and take over when necessary.
✗
Question 24. When the OOW sees the master making an erroneous manoeuvre, he should?
Your Answer: (Not answered)
Correct Answer: B (alert clearly with reasons and persist until heard)
💡 Speak up immediately with evidence such as bearing trend and persist; silent compliance is a classic BRM failure.
✗
Question 25. What does signing the handover mean?
Your Answer: (Not answered)
Correct Answer: D (the relieving officer confirms understanding of the situation and accepts the watch)
💡 Signing transfers responsibility: do not sign until you have full information and accept the watch.
✗
Question 26. If the Company cannot produce critical-equipment maintenance records, the likely chain of consequences is?
Your Answer: (Not answered)
Correct Answer: C (audit non-conformity, certificate continuity questioned, higher PSC detention risk)
💡 Missing records break the maintenance-availability-compliance chain, hitting certificates and detention risk.
✗
Question 27. What is the focus when checking an agent's disbursement account?
Your Answer: (Not answered)
Correct Answer: D (whether services actually occurred and rates match the agreement)
💡 Check that services happened and rates match the quotation; query and record discrepancies to stop systematic overcharging.
✗
Question 28. The basis for deciding which spares to carry on board is?
Your Answer: (Not answered)
Correct Answer: B (consequence of failure, difficulty of supply and repair time)
💡 Decide by whether failure strands or endangers the ship, supply difficulty and repair time, not price.
✗
Question 29. Once dragging is confirmed, the first measure is?
Your Answer: (Not answered)
Correct Answer: C (inform the master, stand by engines and take holding action such as a second anchor or shifting)
💡 Report, stand by engines and act with a second anchor, shifting or leaving to avoid grounding or collision.
✗
Question 30. What happens if the deck log is altered after an accident?
Your Answer: (Not answered)
Correct Answer: A (treated as obstructing justice and destroying credibility, aggravating liability)
💡 Post-incident alteration is forgery of evidence, destroying credibility and aggravating liability; correct properly instead.
✗
Question 31. A proper critical-operation procedure should contain?
Your Answer: (Not answered)
Correct Answer: A (responsible person, timing, steps, risks and preventive measures)
💡 Procedures must state who, when, how, risks and precautions for correct execution.
✗
Question 32. To test real capability, drills should occasionally?
Your Answer: (Not answered)
Correct Answer: A (be unannounced with injected variables to test improvisation)
💡 Surprise drills expose plan gaps and real skill—an improvement chance.
✗
Question 33. A fuel oil mist leak is found in the engine room; what applies?
Your Answer: (Not answered)
Correct Answer: D (slow down and stop, remove ignition sources and find the leak)
💡 A fuel mist easily forms an explosive mixture; stop the equipment, remove ignition and locate and stop the leak.
✗
Question 34. Orders in a multilingual environment should be?
Your Answer: (Not answered)
Correct Answer: A (use the common working language and standard phrases with read-back)
💡 Give orders in the common working language with standard phrases and read-back before anyone acts.
✗
Question 35. Psychological support for crew after a major event should?
Your Answer: (Not answered)
Correct Answer: A (timely identify trauma, provide debrief and follow-up, in the SMS)
💡 Psychological trauma affects later duty; the SMS needs support mechanisms.
✗
Question 36. The difference between safety observation and safety audit is?
Your Answer: (Not answered)
Correct Answer: B (observation targets daily behaviour with immediate feedback; audit targets conformity)
💡 Observation is routine peer or supervisor feedback; audit is planned verification of conformity and effectiveness.
✗
Question 37. The master finds enclosed-space work without a permit; he should?
Your Answer: (Not answered)
Correct Answer: A (stop work at once and require a permit and satisfactory tests before entry)
💡 Unpermitted entry is potentially fatal; withdraw the team and require permit, ventilation and testing first.
✗
Question 38. A tanker Shipboard Oil Pollution Emergency Plan (SOPEP) must contain?
Your Answer: (Not answered)
Correct Answer: A (reporting procedure, spill steps, contacts, shore coordination)
💡 SOPEP must have reporting, response steps, equipment and contact lists; it is statutory and PSC-checked.
✗
Question 39. Insurance handling for entering war or high-risk waters is?
Your Answer: (Not answered)
Correct Answer: C (notify insurers in advance and arrange agreed war-risk cover)
💡 Notify insurers and take up agreed war cover before entry, paying extra premium to avoid a cover gap.
✗
Question 40. The principle of waste heat recovery for saving energy is?
Your Answer: (Not answered)
Correct Answer: C (use exhaust and jacket water heat to raise steam or generate power)
💡 Exhaust boilers and turbo generators recover heat for steam or power, cutting auxiliary fuel use.
✗
Question 41. Requirements for drawings and technical data on board are?
Your Answer: (Not answered)
Correct Answer: B (valid editions, complete, accessible and matching the actual ship)
💡 Drawings must reflect the ship after modifications, be current and accessible; wrong ones mislead in emergencies.
✗
Question 42. Control of third-party personnel safety risks should be?
Your Answer: (Not answered)
Correct Answer: B (safety briefing before boarding, escorted throughout with proper PPE)
💡 Repairers, surveyors and tally staff briefed, equipped with PPE and accompanied in designated areas.
✗
Question 43. The emergency generator fails to auto-start at sea; you should?
Your Answer: (Not answered)
Correct Answer: B (investigate, start manually, repair and report the company)
💡 Emergency power failure is critical: find the cause, start manually, repair and report, monitoring closely meanwhile.
✗
Question 44. What is the basis for segregation of dangerous goods?
Your Answer: (Not answered)
Correct Answer: C (compatibility and segregation requirements between classes)
💡 Segregation depends on class compatibility determined from the tables to prevent reactions causing fire or poisoning.
✗
Question 45. Why do accommodation disinfection and pest control matter?
Your Answer: (Not answered)
Correct Answer: B (prevent vector-borne disease and improve living hygiene)
💡 Pest control and disinfection reduce vector-borne disease and improve living conditions per the conventions.
✗
Question 46. An internal audit should cover?
Your Answer: (Not answered)
Correct Answer: A (both shore-side management and each ship's SMS operation (sampled))
💡 Internal audit covers Company and fleet, sampled by risk and cycle.
✗
Question 47. The company requires the ship to trade with an expired certificate; the master should?
Your Answer: (Not answered)
Correct Answer: C (refuse to sail and report to the DPA and flag State)
💡 Trading without valid certificates is serious; refuse and report to the DPA and flag, keeping written evidence.
✗
Question 48. The main security concern with ship-shore data synchronisation is?
Your Answer: (Not answered)
Correct Answer: A (expanded attack surface exposing navigational or commercial data)
💡 Connectivity raises cyber exposure; segregate critical systems, control access, back up and train crews.
✗
Question 49. The OOW sees another vessel overtaking too closely; he should?
Your Answer: (Not answered)
Correct Answer: C (hold course and speed, monitor closely and alert the other and master if needed)
💡 As stand-on, hold course and speed while watching closely; alert the other and call the master if risk develops.
✗
Question 50. The master finds the OOW deviated from the planned route without reporting; he should?
Your Answer: (Not answered)
Correct Answer: C (correct the course, find the cause and restate the reporting requirement)
💡 Deviation is a major risk event; correct it, find whether fatigue or judgement failed and restate reporting discipline.
✗
Question 51. The occupational hazards of enclosed-space work are?
Your Answer: (Not answered)
Correct Answer: D (combined risk of oxygen deficiency, toxic gas and flammability)
💡 Enclosed spaces combine asphyxiation, toxicity and flammability; test, ventilate and watch—missing one can kill.
✗
Question 52. To whom is the Document of Compliance (DOC) issued?
Your Answer: (Not answered)
Correct Answer: A (issued to a company, one copy per ship type)
💡 The DOC is issued to the company per ship type, evidencing SMS compliance with ISM.
✗
Question 53. In port an open ballast tank manhole is found; what applies?
Your Answer: (Not answered)
Correct Answer: B (close it at once, find why and assess flooding and pollution risk)
💡 An open manhole risks flooding and stability; close it, find the cause and assess any ingress or pollution.
✗
Question 54. The fire main ruptures underway causing loss of fire water pressure; you should?
Your Answer: (Not answered)
Correct Answer: A (isolate the damaged section, use an alternate supply and organise repair)
💡 Isolate the leak, use the emergency pump or alternate line to restore fire water, repair and report.
✗
Question 55. Near the termination of a traffic separation scheme, what needs special attention?
Your Answer: (Not answered)
Correct Answer: B (traffic merges with complex flows here; look out and assess early)
💡 At terminations and junctions flows merge and cross; look out hard, assess early and keep a safe speed.
✗
Question 56. Records of crew familiarisation and training should?
Your Answer: (Not answered)
Correct Answer: C (be genuine, tied to person and date, consistent with actual duties)
💡 Familiarisation records must be real and person-specific; forgery is a serious finding.
✗
Question 57. A "substandard ship" is often judged by?
Your Answer: (Not answered)
Correct Answer: B (multiple defects plus poor upkeep and SMS failure)
💡 Substandard status is the combination of defects, poor upkeep and failed SMS, not age alone.
✗
Question 58. When a surveyor lists outstanding items, you should?
Your Answer: (Not answered)
Correct Answer: C (agree deadlines and owners, complete them and request confirmation before expiry)
💡 Log owners and deadlines, complete and request confirmation; overdue items can affect the certificate's validity.
✗
Question 59. How should dietary and religious customs of a multinational crew be handled?
Your Answer: (Not answered)
Correct Answer: D (respect and accommodate them as far as conditions allow)
💡 Respecting diet and religion lifts morale and cohesion; plan meals fairly within what is practical.
✗
Question 60. Who bears safety responsibility during ship repair?
Your Answer: (Not answered)
Correct Answer: A (the master remains responsible for ship safety with responsibilities agreed with the yard)
💡 The master's safety responsibility does not transfer; define interfaces with the yard and control hot work and enclosed spaces.
✗
Question 61. An example of a leading indicator is?
Your Answer: (Not answered)
Correct Answer: C (timely hazard closure rate and near-miss reports)
💡 Leading measures reflect prevention activity such as drills, reporting and closure rates, predicting future outcomes.
✗
Question 62. On what basis is the quantity of oil cargo normally measured?
Your Answer: (Not answered)
Correct Answer: C (volume reduced to the standard reference temperature, the buoyancy correction separating the two weights)
💡 Delivery is reckoned on volume at the standard reference temperature: the cargo's observed temperature and density are taken, the observed volume is reduced by the volume correction factor, and the weight follows from that; converting weight in vacuo to weight in air takes the buoyancy correction, the deduction of the air the cargo displaces, which is the arithmetic behind the customary gap between bill of lading and shore figures. Handing over the shore reading or the observed volume leaves the temperature difference in the account, and drafts will not give the cargo reliably, tide, dock water density and hull deformation being against them, so drafts serve only as a check. Where ship and shore disagree beyond what practice allows, the measurement method and the cargo data are gone over and what was done recorded.
✗
Question 63. What does sediment management in ballast tanks involve?
Your Answer: (Not answered)
Correct Answer: B (periodic removal and disposal per procedure to avoid spread on discharge)
💡 Sediment concentrates organisms; remove it on plan and dispose per procedure, never discharge or dump it.
✗
Question 64. The significance of benchmarking is?
Your Answer: (Not answered)
Correct Answer: D (reveal gaps and improvement space by comparing with peers)
💡 Comparing with peers or own history avoids complacency and clarifies priorities for improvement.
✗
Question 65. During bunkering a crew member leaves his post; what applies?
Your Answer: (Not answered)
Correct Answer: A (cover the post at once, correct him and restate the watch requirement)
💡 Bunkering needs continuous dedicated watch; leaving the post means a spill goes unseen, so cover and correct it firmly.
✗
Question 66. A crew member lacks a valid medical certificate while in port; you should?
Your Answer: (Not answered)
Correct Answer: B (report the company and arrange examination, no watch until cleared)
💡 Without a valid medical the seafarer is not fit; report, arrange examination and keep him off watch until cleared.
✗
Question 67. What does a low insulation alarm indicate?
Your Answer: (Not answered)
Correct Answer: D (insulation has degraded with leakage, shock and fire risk)
💡 Degraded insulation comes from damp, ageing or damage; locate by circuit and eliminate it before further running.
✗
Question 68. The purpose of testing the main engine before port entry is?
Your Answer: (Not answered)
Correct Answer: A (confirm ahead and astern reliability for engine standby and emergency manoeuvring)
💡 Trial of ahead and astern confirms the plant responds so emergency manoeuvring is available.
✗
Question 69. The priority order for distress, urgency and safety traffic is?
Your Answer: (Not answered)
Correct Answer: D (distress first, then urgency, then safety)
💡 Distress traffic has absolute priority; urgency next, then safety, with routine traffic lowest.
✗
Question 70. The common reporting requirement for security incidents and safety accidents is?
Your Answer: (Not answered)
Correct Answer: B (both reported promptly, recorded and fed into SMS analysis)
💡 Both are reported, logged and analyzed for continuous improvement of the SMS.
✗
Question 71. What makes onboard safety meetings effective?
Your Answer: (Not answered)
Correct Answer: C (focused topics, participation by all and follow-up on previous items)
💡 Effective meetings focus on real risk, involve all ranks and track previous decisions into a closed loop.
✗
Question 72. Proper handling of an observation item is?
Your Answer: (Not answered)
Correct Answer: B (not an NC but analyze trends, improve preventively and track)
💡 Observations signal drift below NC level; still analyze and improve to prevent escalation.
✗
Question 73. Conditions for maintaining management system certification validity include?
Your Answer: (Not answered)
Correct Answer: B (pass surveillance audits, keep the system operating and correct non-conformities)
💡 Certificates require periodic surveillance and renewal with the system running and findings closed or risk suspension.
✗
Question 74. The purpose of the Load Line Certificate is?
Your Answer: (Not answered)
Correct Answer: A (assigns freeboard and marks to protect reserve buoyancy)
💡 It fixes freeboard and marks per zone and season to keep reserve buoyancy and prevent overloading.
✗
Question 75. Measures to mitigate watchkeeper fatigue in BRM include?
Your Answer: (Not answered)
Correct Answer: D (rotation, task variation, movement plus ventilation and lighting)
💡 Rotate tasks, move about, keep air and light, but the real cure is compliant rest and workload control.
✗
Question 76. The basic principle for reporting a major casualty to the company is?
Your Answer: (Not answered)
Correct Answer: A (immediate verbal report followed by written within the required time)
💡 Notify the company at once by phone or telex, then file the written report within the required period.
✗
Question 77. What is the core content of a hot work permit?
Your Answer: (Not answered)
Correct Answer: B (scope, gas testing, fire watch and validity period)
💡 A permit fixes scope and validity, requires gas testing and a fire watch and fire extinguishers before work starts.
✗
Question 78. The main difference between class and statutory certificates is?
Your Answer: (Not answered)
Correct Answer: D (class evidences compliance with class rules; statutory proves convention compliance)
💡 Class certificates cover classification rules; statutory ones prove compliance with conventions issued by the flag.
✗
Question 79. For urgent evacuation ashore, the SMS should?
Your Answer: (Not answered)
Correct Answer: C (contact RCC/agent for helicopter or port, prepare medical handover)
💡 Fast evacuation buys golden time; handover ensures continuity.
✗
Question 80. The correct shipboard attitude toward PSC is?
Your Answer: (Not answered)
Correct Answer: A (comply daily, cooperate, fix findings, keep true records)
💡 A real daily SMS stays calm at inspection; last-minute faking fails.
✗
Question 81. A non-conformity description should include?
Your Answer: (Not answered)
Correct Answer: A (facts, location and time, the specific requirement breached and evidence)
💡 State observed facts and evidence and cite the clause or procedure breached so the auditee can act precisely.
✗
Question 82. IMO intact stability requirements are usually verified via?
Your Answer: (Not answered)
Correct Answer: D (checking stability criteria for loading conditions in approved stability data)
💡 Approved stability data must show compliance of each loading condition with the criteria.
✗
Question 83. Record archiving should facilitate?
Your Answer: (Not answered)
Correct Answer: C (retrieval, audit traceability and trend analysis)
💡 Archive by category and label clearly for retrieval, audits and trend analysis in reviews.
✗
Question 84. Waiting for a berth causes high emissions; a reasonable response is?
Your Answer: (Not answered)
Correct Answer: B (coordinate arrival time with agent and terminal to cut waiting)
💡 Just-in-time arrival cuts waiting emissions and should be part of voyage planning and ship-shore communication.
✗
Question 85. Why does engine room cleanliness matter for safety?
Your Answer: (Not answered)
Correct Answer: A (less oil accumulation cutting fire and slip hazards)
💡 Oil and rags fuel fires and foul machinery; cleanliness also reveals fresh leaks, a fundamental control.
✗
Question 86. What is required for storing paints and chemicals?
Your Answer: (Not answered)
Correct Answer: C (dedicated spaces, ventilated and fire safe, with protective and spill equipment)
💡 Flammable and harmful stores need dedicated ventilated fire-safe spaces with labels, PPE and spill kits.
✗
Question 87. How is the NC closure deadline usually set?
Your Answer: (Not answered)
Correct Answer: A (minor NC within a set period (e.g. three months), major NC immediately)
💡 Minor NCs close within a set period; major NCs need immediate demonstrated correction.
✗
Question 88. What is the Tonnage Certificate used for?
Your Answer: (Not answered)
Correct Answer: A (states gross and net tonnage for dues and regulatory thresholds)
💡 Tonnage is used for port and canal dues and determines applicability of certain conventions.
✗
Question 89. Common causes of distorted performance data are?
Your Answer: (Not answered)
Correct Answer: B (targets tied to appraisal causing false or selective reporting)
💡 When metrics drive rewards or penalties, staff under-report or polish data; soften punitive use and cross-verify.
✗
Question 90. Being overtaken by a larger vessel in a channel, your ship should?
Your Answer: (Not answered)
Correct Answer: C (hold course and speed and cooperate, agreeing a safe passing if needed)
💡 As overtaken keep course and speed, confirm the passing arrangement and consider available water and bank effects.
✗
Question 91. To whom is the Safety Management Certificate (SMC) issued?
Your Answer: (Not answered)
Correct Answer: B (issued to an individual ship with an effective SMS)
💡 The SMC is issued per ship after initial/intermediate/renewal audit, typically valid five years.
✗
Question 92. A new crew member still unaware of alarms/duties after a week is a?
Your Answer: (Not answered)
Correct Answer: A (familiarisation non-conformity, breaching ISM Chapter 6)
💡 Chapter 6 requires competence and familiarisation; ignorance hurts safety directly.
✗
Question 93. In recruiting crew the Company should?
Your Answer: (Not answered)
Correct Answer: A (verify credentials, certificate authenticity and safety record)
💡 Recruitment vetting blocks fake certificates and incompetence aboard.
✗
Question 94. What is a reasonable frequency for oil spill drills?
Your Answer: (Not answered)
Correct Answer: D (carried out periodically within the maximum interval set by the system)
💡 The system fixes a maximum interval and must comply so crews know duties and equipment before an incident.
✗
Question 95. Sea suction blocked by frazil ice in ice-covered waters; you should?
Your Answer: (Not answered)
Correct Answer: A (switch to an alternate sea chest, back-flush and reduce load)
💡 Blocked suctions stop cooling; change chests or back-flush and reduce load to avoid overheating shutdown.
✗
Question 96. What is the priority when an accident causes injury?
Your Answer: (Not answered)
Correct Answer: C (save life first while reporting and preserving the scene and evidence)
💡 Life first: rescue while reporting and preserving scene and evidence, then deal with cargo and schedule.
✗
Question 97. What are the discharge limits for food waste?
Your Answer: (Not answered)
Correct Answer: B (may be discharged beyond a certain distance from land, stricter in special areas)
💡 Food waste may go overboard beyond prescribed distances, with stricter rules in special areas; follow the area rules.
✗
Question 98. What is the core objective of the safety management system?
Your Answer: (Not answered)
Correct Answer: D (ensure safety at sea, prevent injury and pollution)
💡 The aims are safety at sea, prevention of injury and pollution and continual improvement, not profit.
✗
Question 99. When must the officer of the watch call the master?
Your Answer: (Not answered)
Correct Answer: A (in restricted visibility, when traffic presses on the manoeuvre, when equipment fails, or on anything he is not sure of)
💡 What the system generally sets down as immediate calls to the master: visibility falling or weather turning, traffic thickening until the manoeuvre is cramped, a close quarters distance with some target, failure of steering gear, main engine, radar or electronic chart, a position in doubt or a departure from the plan, a decision on course or speed he is not equal to alone, and anything of a security or pollution kind. The last of them - anything he is not sure of - is the one that matters, since it takes the cost of a wrong call off the officer and leaves only the risk of not calling. The document should also say what to do when the master cannot be raised: call the chief officer rather than carry it alone.
✗
Question 100. The correct way to receive a SIRE inspection on board is?
Your Answer: (Not answered)
Correct Answer: D (accompanied by master or chief officer, providing records and explanations truthfully)
💡 The master or chief officer should accompany throughout, opening records and answering honestly.