Exam Home Website
中文 English
0
/100
FAIL
Correct: 0/100 Total Questions: 100 Time Spent: 60min0sec
Passing: 80
Retake History
Answer Review
✗
Question 1. Temperature control for high-melt-point cargoes aims to?
Your Answer: (Not answered)
Correct Answer: B (keep pumpability, prevent solidifying, safe heating)
💡 High-melt cargoes need heating for pumpability without overheating or equipment damage.
✗
Question 2. When a surveyor boards, the master should provide?
Your Answer: (Not answered)
Correct Answer: D (relevant certificates, records, drawings and supporting staff)
💡 Provide certificates, reports, maintenance and test records and drawings, with knowledgeable escorts.
✗
Question 3. Reporting requirements for occupational injury and illness are?
Your Answer: (Not answered)
Correct Answer: C (record promptly, report to company and notify authorities and club as required)
💡 Record and report promptly to company, authorities and club, then analyse causes to prevent recurrence.
✗
Question 4. The Company's resource provision for the ship shall?
Your Answer: (Not answered)
Correct Answer: A (meet the actual needs of safe operation and pollution prevention)
💡 Rules 4/6: the Company must provide adequate resources (crew, equipment, support) for safe and clean operation.
✗
Question 5. The focus of occupational health on board is?
Your Answer: (Not answered)
Correct Answer: A (prevent noise, dust, chemical and heat hazards at work)
💡 Prevention matters: control noise, dust, chemicals, heat and vibration with medicals and protection.
✗
Question 6. What is required for the security interface with a port facility?
Your Answer: (Not answered)
Correct Answer: B (exchange security information as required and sign a declaration or confirm levels)
💡 Ship and facility exchange security information and sign a declaration where required, defining duties and restricted areas.
✗
Question 7. About to sail in port, a crew member has not returned; the master should?
Your Answer: (Not answered)
Correct Answer: B (report to agent and authorities to locate him, delaying sailing if needed)
💡 Notify agent and authorities and the company, delaying departure if needed; never leave a person behind.
✗
Question 8. Emergency drill categories a ship must regularly conduct include?
Your Answer: (Not answered)
Correct Answer: A (fire, abandon ship, pollution response, etc.)
💡 Rule 8: ships conduct fire, abandon-ship, pollution and other drills as planned.
✗
Question 9. The core role of the Ship Security Plan (SSP) is?
Your Answer: (Not answered)
Correct Answer: C (specify the concrete security measures and duties at each level)
💡 The SSP is the security playbook—confidential, controlled, executed per level.
✗
Question 10. When new rules/circulars appear, the SMS should?
Your Answer: (Not answered)
Correct Answer: A (assess impact, revise procedures and train to stay compliant)
💡 Rules evolve; the SMS must keep pace or fall behind compliance.
✗
Question 11. When a pilot gives an obviously dangerous order, the master should?
Your Answer: (Not answered)
Correct Answer: A (question it at once and take over with safe action if needed)
💡 The master has both the right and duty to question and take over, ensuring safety and reporting afterwards.
✗
Question 12. If heel grows abnormally during cargo work, what applies?
Your Answer: (Not answered)
Correct Answer: B (suspend the relevant work, find the cause and adjust loading)
💡 Abnormal heel comes from wrong sequence, mis-set valves or free surface; stop and find the cause before adjusting.
✗
Question 13. Which operations must the system single out?
Your Answer: (Not answered)
Correct Answer: C (those where one mistake reaches the accident directly: navigation, cargo work, entry into enclosed spaces, hot work and work aloft)
💡 The system asks that those operations be identified where a single mistake can reach an accident or a pollution directly, and that written procedures and checklists be made for them with an owner named to carry them out: navigation in dense traffic and narrow waters, berthing and anchoring, cargo work and the stowage of solids, entry into enclosed spaces, hot work, work aloft and over the side, bunkering, the upkeep of life-saving and fire gear, access to secured areas. The point is not to write everything to the same length - treating all alike picks nothing out - but to have the steps most likely to go wrong owned, checked against a list and evidenced. The upkeep of equipment is a separate requirement rather than the same thing as a critical-operation procedure, though it is commonly grouped with what is watched closely.
✗
Question 14. For tanker ship-to-ship (STS) transfer, the SMS specifically requires?
Your Answer: (Not answered)
Correct Answer: C (prior approval, compatibility assessment, joint emergency coordination, on-scene command)
💡 STS is high-risk; prior plan, compatibility and unified command are mandatory.
✗
Question 15. Fire drills should cover?
Your Answer: (Not answered)
Correct Answer: B (alarm, locate, isolate, extinguish, ventilate and search)
💡 Fire drills are end-to-end: alarm to search, testing organisation and gear.
✗
Question 16. What is the role of the accident investigation report in the system?
Your Answer: (Not answered)
Correct Answer: A (input to root cause analysis and corrective action driving improvement)
💡 Its value is improvement: convert it into root cause analysis and corrective action with effectiveness tracking, not blame.
✗
Question 17. A common corrective measure for asymmetric flooding is?
Your Answer: (Not answered)
Correct Answer: C (counter-flood symmetrically to reduce heel)
💡 Counter-flooding on the opposite side reduces heel but must respect stability and strength, not sacrifice buoyancy.
✗
Question 18. What is the priority when an accident causes injury?
Your Answer: (Not answered)
Correct Answer: C (save life first while reporting and preserving the scene and evidence)
💡 Life first: rescue while reporting and preserving scene and evidence, then deal with cargo and schedule.
✗
Question 19. At sea the charted depth differs from the echo sounder reading; what applies?
Your Answer: (Not answered)
Correct Answer: A (increase caution, slow down, report and divert to safe water if needed)
💡 Differences may come from old survey data or position error; slow, report, divert if needed and amend the data.
✗
Question 20. What should structural maintenance records be?
Your Answer: (Not answered)
Correct Answer: C (complete and continuous, forming a traceable history for survey and decisions)
💡 Continuous records show corrosion and repair trends and support survey, budgeting and risk assessment.
✗
Question 21. What are the compliance requirements for incineration?
Your Answer: (Not answered)
Correct Answer: A (use approved equipment for permitted categories, never burning plastics)
💡 Use an approved incinerator for permitted categories only; plastics and oil residues are banned, and operations must be logged.
✗
Question 22. The essence of Port State Control (PSC) is?
Your Answer: (Not answered)
Correct Answer: D (coastal states inspect foreign ships for convention compliance)
💡 PSC is the second line, compensating flag-state gaps for safety.
✗
Question 23. Which is NOT the priority order of risk control measures?
Your Answer: (Not answered)
Correct Answer: B (personal protective equipment first)
💡 Control priority runs elimination, substitution and engineering, then administrative, with PPE the last resort.
✗
Question 24. The harm of retaliation against reporters is?
Your Answer: (Not answered)
Correct Answer: B (destroys reporting culture, driving hazards underground until accidents occur)
💡 Retaliation teaches silence; systemic hazards stay hidden until they surface as casualties at far greater cost.
✗
Question 25. When condition monitoring data turn abnormal, you should?
Your Answer: (Not answered)
Correct Answer: B (recheck sampling and measurement, increase monitoring and arrange inspection)
💡 First rule out sampling or measurement error, monitor more often and inspect to confirm the trend before action.
✗
Question 26. The Company's support for masters includes?
Your Answer: (Not answered)
Correct Answer: B (SMS training, decision authority, resources, no penalty for safety calls)
💡 Masters must be empowered and protected to make bold safety calls.
✗
Question 27. High crew turnover's safety chain effect is?
Your Answer: (Not answered)
Correct Answer: C (lower familiarity, training pressure, experience gap)
💡 Turnover shrinks the experienced pool, raising risk via lower familiarity.
✗
Question 28. Priority items to take when abandoning ship include?
Your Answer: (Not answered)
Correct Answer: A (logbook and essential certificates, EPIRB and drinking water)
💡 Take statutory documents, EPIRB, handheld radio, water and first aid; life takes precedence over property.
✗
Question 29. When security level rises from 1 to 2, the ship normally should?
Your Answer: (Not answered)
Correct Answer: D (step up per SSP: more patrols, restricted access, tighter checks)
💡 Level 2 triggers tighter access control, patrols and identity checks per the SSP, all recorded.
✗
Question 30. What is the prerequisite for restarting after an emergency stop?
Your Answer: (Not answered)
Correct Answer: A (find and remove the cause, complete turning gear checks and confirm it is safe)
💡 Find the cause, turn the engine and confirm safety before restarting; never force a restart with a fault present.
✗
Question 31. What does alarm fatigue on the bridge mean?
Your Answer: (Not answered)
Correct Answer: A (excessive alarms cause dismissal or silencing, missing critical alerts)
💡 Constant low-value alarms desensitise crews; tune thresholds and priorities so critical alerts stand out.
✗
Question 32. Before transiting a canal or narrow channel, what preparation does the system require?
Your Answer: (Not answered)
Correct Answer: B (checklist on equipment, people and documents and briefing those involved)
💡 Use a checklist on equipment, crew and documents and brief the team on duties and contingencies, not just wait for the pilot.
✗
Question 33. The purpose of timing drills is?
Your Answer: (Not answered)
Correct Answer: D (quantify response, expose delays and provide a basis for improvement)
💡 Timing converts impressions into comparable data on muster and launching, revealing bottlenecks to work on.
✗
Question 34. Liferaft markings are unclear and the strap aged at sea; you should?
Your Answer: (Not answered)
Correct Answer: B (report the company for service at port including markings and strap)
💡 Markings and straps affect identification and release; arrange service at an approved station, monitoring meanwhile.
✗
Question 35. What should the master not do while the pilot is manoeuvring?
Your Answer: (Not answered)
Correct Answer: D (abandon monitoring and leave the bridge)
💡 The master must keep oversight of position and movement; leaving the bridge abandons responsibility and is a serious error.
✗
Question 36. Advised of an impending strong wind warning while in port; you should?
Your Answer: (Not answered)
Correct Answer: C (add lines and fenders, suspend work and strengthen the watch)
💡 Before strong wind add lines and fenders, stop cargo or lifting, strengthen watches and consider shifting berth.
✗
Question 37. Auditors collect objective evidence mainly by?
Your Answer: (Not answered)
Correct Answer: C (interviews, observation, reviewing records and documents)
💡 Ask, observe, check—evidence must be objective and traceable.
✗
Question 38. Company feedback to ship reports should?
Your Answer: (Not answered)
Correct Answer: A (respond promptly with clear direction or resources and follow up)
💡 The company must reply with decisions, resources and ownership; silence kills crew confidence.
✗
Question 39. Discovering the chart lacks recent danger notices while at sea; you should?
Your Answer: (Not answered)
Correct Answer: D (check the latest notices, mark the danger and amend the route to avoid it)
💡 Uncorrected danger data invalidates the route; check current notices, mark the chart and divert if needed.
✗
Question 40. The core of Threat and Error Management (TEM) is?
Your Answer: (Not answered)
Correct Answer: C (anticipate threats, set barriers, trap errors early)
💡 TEM anticipates threats, sets barriers like checklists and read-back, and traps errors before consequences.
✗
Question 41. What status does ISM give the Master regarding safety and pollution prevention?
Your Answer: (Not answered)
Correct Answer: A (overriding authority and final responsibility)
💡 ISM Rule 5: the Master is given overriding authority and bears final responsibility for safety and pollution prevention.
✗
Question 42. After bunkering the fuel sulphur is found above the limit; what applies?
Your Answer: (Not answered)
Correct Answer: B (stop using the fuel, report company and Administration and keep sample evidence)
💡 Do not use off-spec fuel; report and handle as required, keeping samples and bunker documents for compliance and claims.
✗
Question 43. The cycle of continuous improvement in the SMS is?
Your Answer: (Not answered)
Correct Answer: A (plan, do, check, act (PDCA) cycling repeatedly)
💡 The SMS follows PDCA: plan targets, implement with records, check via audit, then improve continuously.
✗
Question 44. Which sea areas does GMDSS mainly cover?
Your Answer: (Not answered)
Correct Answer: A (areas A1, A2, A3 and A4)
💡 GMDSS divides oceans into A1 (VHF), A2 (MF), A3 (satellite) and A4 (polar) with different carriage requirements.
✗
Question 45. The function of a hydrostatic release unit (HRU) is?
Your Answer: (Not answered)
Correct Answer: B (release the lashing at a set depth as the ship sinks so the raft floats free)
💡 The HRU cuts the lashing at about four metres depth, freeing the raft to float and inflate unaided.
✗
Question 46. How should the complaint channel be set in the system?
Your Answer: (Not answered)
Correct Answer: B (provide onboard and ashore channels with protection from retaliation and record outcomes)
💡 Complaints need onboard and ashore routes with non-retaliation and documented outcomes, showing compliance.
✗
Question 47. When the master deems Company support insufficient, he should?
Your Answer: (Not answered)
Correct Answer: A (formally raise via the DPA, recording and escalating)
💡 The DPA channel is the master's formal path for resources and escalation.
✗
Question 48. The usual system-level attribution of a technical failure is?
Your Answer: (Not answered)
Correct Answer: A (inadequate maintenance, missing spares, poor training or weak oversight)
💡 Most technical failures have system roots in maintenance intervals, spares, training or supervision.
✗
Question 49. Key controls in changing over to low-sulphur fuel are?
Your Answer: (Not answered)
Correct Answer: A (control temperature and sequence, complete before entering the ECA and log it)
💡 Follow procedures managing temperature to avoid slugs and viscosity shock, completing before entry and logging it.
✗
Question 50. Management of onboard first aid kits and medicines should?
Your Answer: (Not answered)
Correct Answer: D (kept by a responsible person, expiry checked and restocked, prescription drugs on medical advice)
💡 A designated officer checks expiry and stock with records; controlled drugs need dual custody and medical advice.
✗
Question 51. Which is NOT a purpose of the spare parts register?
Your Answer: (Not answered)
Correct Answer: D (replacing the equipment operating manual)
💡 The register tracks stock, supports buying and checks, but never replaces manuals and technical data.
✗
Question 52. What should NOT be the main metric in assessing a master's performance?
Your Answer: (Not answered)
Correct Answer: A (schedule and cost savings alone)
💡 Judging only on schedule and cost squeezes safety margins; include safety, compliance, SMS and crew development.
✗
Question 53. The significance of auditor independence is?
Your Answer: (Not answered)
Correct Answer: B (avoid self-audit and ensure objective judgement)
💡 Auditors must not audit their own work; use external or cross-department staff to keep findings honest.
✗
Question 54. If a real emergency occurs during a drill, the correct response is?
Your Answer: (Not answered)
Correct Answer: A (stop the drill, switch to real response and announce clearly)
💡 Stop and announce "this is not a drill", then start the real response to avoid confusion.
✗
Question 55. The company orders a speed above the safe limit to shorten the voyage; the master should?
Your Answer: (Not answered)
Correct Answer: B (refuse in writing giving safety reasons and report to the DPA)
💡 Commercial orders cannot override safe speed; refuse in writing and escalate through the system.
✗
Question 56. Why check depth and turning room before berthing?
Your Answer: (Not answered)
Correct Answer: B (confirm manoeuvrability and safety margin against grounding and contact)
💡 Check depth, turning room and tug configuration so the manoeuvre stays within the ship's capability.
✗
Question 57. What is the purpose and risk of synthetic tails on mooring lines?
Your Answer: (Not answered)
Correct Answer: A (add elasticity to absorb shock but need periodic renewal and protection from chafing)
💡 Tails improve elasticity but age and fatigue; renew on schedule, avoid chafing and include them in inspections.
✗
Question 58. How to respond to inaccurate media reporting?
Your Answer: (Not answered)
Correct Answer: A (correct politely with facts and evidence, maintain dialogue)
💡 Correct gently with evidence and keep channels open; silence or aggression magnifies the damage.
✗
Question 59. How long should crew change documents and records be kept?
Your Answer: (Not answered)
Correct Answer: C (kept for the period set by company and law for inspection and disputes)
💡 Crew change records are evidence for inspection and disputes; keep them for the required period and retrievable.
✗
Question 60. What principle applies to accounts for critical control systems?
Your Answer: (Not answered)
Correct Answer: B (least privilege, named accounts and periodic removal of leavers)
💡 Name accounts, apply least privilege and remove leavers' access; shared accounts destroy accountability.
✗
Question 61. The significance of sealing fuel samples is?
Your Answer: (Not answered)
Correct Answer: B (preserve analysable evidence for quality disputes and contamination claims)
💡 Sample at the manifold, seal jointly and retain so disputes over quality or damage can be analysed.
✗
Question 62. The key to spreading best practice is?
Your Answer: (Not answered)
Correct Answer: C (prove effectiveness, standardise, train and track adoption)
💡 Validate first, standardise, train and track adoption on board—only then is a practice truly spread.
✗
Question 63. Why does engine room cleanliness matter for safety?
Your Answer: (Not answered)
Correct Answer: A (less oil accumulation cutting fire and slip hazards)
💡 Oil and rags fuel fires and foul machinery; cleanliness also reveals fresh leaks, a fundamental control.
✗
Question 64. Cargo shifts during the voyage; the first measure is?
Your Answer: (Not answered)
Correct Answer: B (alter course and speed to reduce rolling, secure the cargo and assess stability)
💡 Reduce rolling and assess stability first, then secure or ballast; opening hatches or holding speed worsens it.
✗
Question 65. The most effective long-term company measure to reduce PSC risk is?
Your Answer: (Not answered)
Correct Answer: A (run the SMS routinely with self-checks and closed-loop fixes)
💡 Routine SMS operation with self-checks and traceable records beats last-minute fixes or connections.
✗
Question 66. Berthing at night with poor quay lighting and a strong cross-current, the master should?
Your Answer: (Not answered)
Correct Answer: B (postpone or request extra tugs and lighting after risk assessment)
💡 With poor light and cross-current do not force it; wait or add tugs rather than be driven by schedule.
✗
Question 67. When planning with ECDIS, what should also be retained?
Your Answer: (Not answered)
Correct Answer: C (paper chart or backup plus manual position check)
💡 Retain paper charts or backup and cross-check position manually against ECDIS failure.
✗
Question 68. An internal auditor reviewing their own department causes?
Your Answer: (Not answered)
Correct Answer: A (loss of independence, lower credibility)
💡 Independence underpins objectivity; self-audit is no audit.
✗
Question 69. In fog a target ahead shows slowly changing bearing; you should?
Your Answer: (Not answered)
Correct Answer: A (stay alert, keep plotting and take early substantial action if needed)
💡 A slowly changing bearing can still become dangerous; keep plotting and assess CPA, acting early and substantially.
✗
Question 70. The master's safety attitude affects the crew by?
Your Answer: (Not answered)
Correct Answer: A (leading by example; the master sets the safety-culture tone)
💡 The master sets the safety-culture tone; conduct shapes compliance.
✗
Question 71. What should a technical condition report be?
Your Answer: (Not answered)
Correct Answer: B (objective and specific with evidence and recommendations to support shore decisions)
💡 Reports must be objective, specific and evidenced with recommendations so shore can resource and decide without distortion.
✗
Question 72. The key requirement for lifeboat emergency organisation is?
Your Answer: (Not answered)
Correct Answer: B (a designated boat coxswain and second-in-command with crew duties clear)
💡 Assign a coxswain and deputy with clear duties, boarding order and seating for an organised launch.
✗
Question 73. Sampling shows the ballast water exceeds the standard; the master should?
Your Answer: (Not answered)
Correct Answer: A (stop discharge, report company and port authority and cooperate further)
💡 Stop discharge, report truthfully and cooperate; tampering with samples or records has serious legal consequences.
✗
Question 74. What does ISM Chapter 2 (Safety and Environmental Protection Policy) require?
Your Answer: (Not answered)
Correct Answer: B (the company states a written policy implemented ashore and afloat)
💡 Chapter 2 demands a written commitment implemented at all levels ashore and aboard.
✗
Question 75. A fuel oil mist leak is found in the engine room; what applies?
Your Answer: (Not answered)
Correct Answer: D (slow down and stop, remove ignition sources and find the leak)
💡 A fuel mist easily forms an explosive mixture; stop the equipment, remove ignition and locate and stop the leak.
✗
Question 76. What share of casualty root causes does the human element account for?
Your Answer: (Not answered)
Correct Answer: B (the majority - in over about 80 per cent of casualties human error or a management weakness is present)
💡 The figure shifts with the statistic quoted, but the finding is stable: in most marine casualties one finds a failure of communication, fatigue, a wrong judgement, or a gap in the management system, with pure mechanical breakdown accounting for a small part. The value of the saying is not in memorising a percentage but in where the investigation is then aimed - if responsibility lands on the one man on watch, is punished and the file closed, the next watch on the same passage does the same thing. Hence the system treats the human element, training, fatigue management and reporting culture as separate subjects.
✗
Question 77. The ISM Code was adopted by IMO Assembly resolution A.741(18) and later made mandatory through SOLAS chapter IX. State the year of that resolution and the date by which it became fully mandatory for cargo ships of 500 gross tonnage and upwards on international voyages.
Your Answer: (Not answered)
Correct Answer: A (adopted in 1993; fully mandatory for cargo ships by 1 July 1998)
💡 Resolution A.741(18) was adopted by the 18th Assembly on 4 November 1993; the "(18)" is the assembly session, not the year 1994. SOLAS chapter IX entered into force on 1 July 1998, with phase-in for other cargo ships of 500 GT and upwards completing by 1 July 2002.
✗
Question 78. How is contact with shore medical advice (TMAS) normally obtained?
Your Answer: (Not answered)
Correct Answer: D (by radio or satellite using numbers listed in the guide)
💡 Ships carry lists of stations offering medical advice reachable by satellite or MF/HF, listed in the guides.
✗
Question 79. At night a floating container is sighted ahead; what applies?
Your Answer: (Not answered)
Correct Answer: B (alter course to avoid it, slow down and report to VTS and following ships)
💡 A floating container is a serious collision hazard; avoid, slow and alert VTS and other ships so they do not hit it.
✗
Question 80. What is a common sign of undeclared dangerous goods in a container?
Your Answer: (Not answered)
Correct Answer: B (vague cargo description, abnormal weight or missing documents)
💡 Vague names, odd weights, missing papers and unusual odours are clues; stop work and verify when found.
✗
Question 81. The role of regular Company safety meetings (safety committee) is?
Your Answer: (Not answered)
Correct Answer: A (report KPIs, analyse trends, deploy improvement, closing the loop)
💡 Safety meetings turn data into action—the improvement driver.
✗
Question 82. When documenting a new SMS, one should avoid?
Your Answer: (Not answered)
Correct Answer: B (copying another ship's template detached from this ship's reality)
💡 Templated systems misfit and cause PSC findings and casualties.
✗
Question 83. Where should ballast water management system operations be recorded?
Your Answer: (Not answered)
Correct Answer: B (the Ballast Water Record Book)
💡 Ballast operations are logged in the Ballast Water Record Book with area, system operation and anomalies for port State checks.
✗
Question 84. When spare stock is insufficient, the proper response is?
Your Answer: (Not answered)
Correct Answer: D (report the company, request replenishment and apply temporary monitoring or equivalent measures)
💡 Report shortfalls, request supply and add monitoring or equivalent measures; never cannibalise or run at risk.
✗
Question 85. What does considering an emergency exit in the berthing plan mean?
Your Answer: (Not answered)
Correct Answer: C (pre-planning withdrawal routes and measures for loss of control or sudden events)
💡 Every berthing plan needs a pre-planned exit with tug and engine coordination so there is a way out if control is lost.
✗
Question 86. What is the purpose of periodic onboard drills?
Your Answer: (Not answered)
Correct Answer: A (maintain emergency response capability and reveal gaps in the plan)
💡 Drills maintain competence and test whether plans work, a key way to find problems and improve the system.
✗
Question 87. The company asks the ship to skip drills to save time; the master should?
Your Answer: (Not answered)
Correct Answer: C (refuse, cite the statutory requirement and escalate to the DPA if needed)
💡 Statutory drills cannot be skipped: refuse with reasons and escalate to the DPA or authorities, keeping records.
✗
Question 88. How should AIS be handled when transiting a high risk area?
Your Answer: (Not answered)
Correct Answer: C (decide visibility per company risk assessment and naval guidance)
💡 Decide AIS on the company risk assessment and naval advice; blind switching off forfeits friendly identification.
✗
Question 89. Before high-risk work (enclosed-space entry, hot work) one should conduct?
Your Answer: (Not answered)
Correct Answer: D (a Job Safety Analysis (JSA) and permit-to-work, with measures and watch)
💡 Permit-to-work plus JSA pins down hazards, controls, responsible persons and watch—a life-saving system.
✗
Question 90. How are improvement results locked in?
Your Answer: (Not answered)
Correct Answer: B (revise SMS documents, add to training and checklists and keep monitoring)
💡 Write into procedures, train and checklists and keep monitoring, or gains fade with crew turnover and time.
✗
Question 91. Why re-check cargo securing during the voyage?
Your Answer: (Not answered)
Correct Answer: C (lashings slacken with motion; re-tightening prevents cargo shift)
💡 Lashings slacken under motion, so re-tension them especially after heavy weather to prevent bulk cargo shift.
✗
Question 92. How to prevent obsolete documents being used by mistake?
Your Answer: (Not answered)
Correct Answer: B (recall old copies, stamp them obsolete and update the distribution list)
💡 Recall and stamp superseded copies and update distribution so replaced documents are not still in use.
✗
Question 93. What does tacit knowledge on board refer to?
Your Answer: (Not answered)
Correct Answer: B (undocumented know-how passed by experience about quirks and equipment)
💡 It covers equipment quirks, port peculiarities and troubleshooting tips—valuable assets beyond documents worth passing on.
✗
Question 94. Two masters hand over at Xiamen. As to statutory documents, which item most needs checking item by item on the spot and is hardest to attribute afterwards?
Your Answer: (Not answered)
Correct Answer: A (that each certificate's title, number, validity and signature pages are complete, with outstanding deficiencies and pending actions entered in the handover record)
💡 An expired certificate or a missing signature page is laid at the serving master's door at the next PSC inspection; if the handover list is silent the incoming master inherits the blame, and the same holds for outstanding deficiencies. The other items are administrative and can be reissued by the company.
✗
Question 95. To whom is the Safety Management Certificate (SMC) issued?
Your Answer: (Not answered)
Correct Answer: B (issued to an individual ship with an effective SMS)
💡 The SMC is issued per ship after initial/intermediate/renewal audit, typically valid five years.
✗
Question 96. How does continuous improvement show in the SMS?
Your Answer: (Not answered)
Correct Answer: A (revising procedures and targets from audits, incidents and data)
💡 It turns audit findings, lessons and KPI trends into revised documents, training and resources in a repeating cycle.
✗
Question 97. The Company training system should cover?
Your Answer: (Not answered)
Correct Answer: A (induction, transfer, new equipment, emergency and refresher)
💡 Training spans the whole career; new gear and emergencies need specifics.
✗
Question 98. Visibility drops sharply in a narrow channel; you should?
Your Answer: (Not answered)
Correct Answer: B (slow with engines ready, sound fog signals and anchor or leave the channel as appropriate)
💡 Slow and ready engines, sound signals, look out hard and inform VTS; anchor safely if continuing is unsafe.
✗
Question 99. Protection when working with chemicals such as cleaners and paints is?
Your Answer: (Not answered)
Correct Answer: D (gloves, goggles, respiratory protection and ventilation)
💡 Follow instructions with gloves, goggles and respiratory protection, ventilate and avoid skin contact and inhalation.
✗
Question 100. By object, SMS audits may include?
Your Answer: (Not answered)
Correct Answer: A (system, procedure and activity (on-site ops) audits)
💡 Three layers—system, procedure, activity—cover write-do-record.